Q:The 100 lb suggested max capacity is limited by the drywall. What is the max capacity of the anchor assembly when installed through material that is much stronger than drywall, such as 3/4" plywood? Capacity would be much higher than 100 lbs., correct?
by|Sep 21, 2023
1 Answer
Answer This Question
A: Hi, these E-Z Ancor Toggle Lock Drywall Anchors are not tested in materials other than drywall so performance figures in other materials are not available. Please contact our Customer Experience team at (877) 489-2726 if you have any additional questions. Thanks!
by|Sep 22, 2023
1 found this answer helpful
Q:Can I put anchor into wall and then add screw
by|Sep 6, 2023
1 Answer
Answer This Question
A: Hi, the E-Z Ancor Toggle Lock Drywall Anchor must be installed into the drywall before the included screw is inserted and screwed into the anchor. The screw must then be tightened until flush and continued to be tightened all the way to ensure that the toggle bar sits flush with the back of the wall. Please make sure to follow all installation instructions outlined on the packaging and contact our Customer Experience team at (877) 489-2726 if you have any additional questions. Thanks!
by|Sep 6, 2023
Q:Once I tighten the screw all the way and the toggle bar is seated flush against the drywall, can I edge out screw enough (1/4 -1/2 inches) to hang a heavy clock
by|Aug 18, 2023
1 Answer
Answer This Question
A: Hi Scott, we would like to get some more information regarding your specific application. Please contact our Customer Experience team at (877) 489-2726 so we can better help you out. Thanks!
by|Jan 17, 2024
Q:Can theses be used on 100 curtains from ceiling to floor on my patio glass sliding door area
by|Jul 17, 2023
1 Answer
Answer This Question
A: Absolutely...
by|Jul 17, 2023
Q:Can I use this for a ceiling fan bracket?
by|Jun 6, 2023
1 Answer
Answer This Question
A: Hi Esteban, we would like some more information on your specific application in order to answer your question. Please contact our Customer Experience team at (877) 489-2726 so we can further assist you. Thanks!
by|Jun 6, 2023
Q:Can I use this to secure to drywall a piece of 2x4 lumber (1�" thick)? If not, can I use this same anchor with a longer #8 screw, like 3" or 3�"?
by|May 14, 2023
1 Answer
Answer This Question
A: Probably would need it longer and it will work. These things were great. They hold like crazy.
by|Jun 7, 2023
Q:I predrilled holes because I was trying to find spots in my wall that aren?t metal.. (don?t judge), but can I use these in pre-existing holes for a TV mount that will hold a 75? tv? Will it solely depend on drywall and be okay? I have no wooden studs.
by|Apr 15, 2023
1 Answer
Answer This Question
A: Hi Emma, do NOT use the E-Z Ancor Toggle Lock Anchors for mounting TVs. Please contact our Customer Experience team at (877) 489-2726 if you have any additional application questions. Thanks!
by|Apr 17, 2023
Q:Will these work to mount curtain rods through .67? trim on top of 1/2? drywall?
by|Feb 21, 2023
1 Answer
Answer This Question
A: Hi Melissa, the E-Z Ancor Toggle Lock anchors will not pre-drill through trim. Please make sure to follow all installation instructions and contact our Customer Experience team at (877) 489-2726 if you have any additional questions. Thanks!
by|Feb 23, 2023
Q:Once the anchor activates, can the screw be removed and swapped with another one? Will the anchor stay in place or fall behind the drywall before you can swap screws?
by|Feb 17, 2023
1 Answer
Answer This Question
A: Hi, please only use the screws that are included with the anchor and do not remove the screw once it has been installed. Please contact our Customer Experience team at (877) 489-2726 if you have any additional questions. Thanks!
by|May 31, 2023
1 found this answer helpful
Q:What's the shortest length screw that can be used with the anchor?
by|Feb 17, 2023
1 Answer
Answer This Question
A: Hi, please only use the screws that are included with the anchor. Thanks!