Q:How much trouble to set it up for 3/4 boards Do you need a gauge, like the infinity cutting tool,?
by|Nov 14, 2023
0 Answer
Answer This Question
Q:What does the1/3 on a half inch dovetail mean
by|Jul 10, 2022
1 Answer
Answer This Question
A: Hi Fawn! There may be an error in the published specifications of this bit. The DR22104 Dovetail bit routs a ½” diameter X ½” high dovetail with 14 degree angles. It has a 1/4:” shank and 1-7/8” overall length. We apologize for any confusion.
by|Mar 30, 2023
3 found this answer helpful
Q:Whats the Max RPM that can be used on it?
by|Nov 8, 2021
1 Answer
Answer This Question
A: Hi Jonathan, the maximum RPM for the DR99035 Lock Miter Bit is 12,000 RPM.
by|Nov 9, 2021
Q:what thickness' of boards will this service ie..both 1/2 and 3/4 in ?
by|Sep 6, 2020
3 Answers
Answer This Question
A: Designed for 3/4" but I have successfully used it with 1/2". The setup on a router table is difficult and you may have some tearout with endgrain on soft or open grain wood. Use a CNC is you can. Model #DR99034 is for 1/2"
by|Dec 28, 2022
1 found this answer helpful
A: Model #DR99034 is for 1/2" stock
by|Feb 1, 2021
A: Yes, the 99-035 Lock Miter Bit can be used with ½” and ¾” material.
by|Oct 14, 2021
Q:Is there a version of this bit with a 1/4" shank? If so what do I have to do to get one?
by|May 14, 2020
1 Answer
Answer This Question
A: Hi Bryan,
No, this bit is only produced with ½” shank.
by|Jun 22, 2020
Q:Does this bit work on miter angles that are off of 45 degrees?
by|Apr 14, 2019
1 Answer
Answer This Question
A: Hi Pete, the Diablo 3/4 inch Carbide Lock Miter Routing Bit (DR99035) is only designed to rout 45 degree angles.
by|Nov 18, 2021
Q:how depth it cut?
by|Aug 14, 2017
2 Answers
Answer This Question
A: You adjust the cut depth by adjusting your router, not the bit.
by|Jun 17, 2020
A: Hi Josie,
Thank you for your question. The cut depth is 1/2" hope this helps.
by|Oct 28, 2022
2 found this answer helpful
Q:Does Diablo offer for sale an alignment tool for this bit? If so, what is it's item/model number and where may I purchase it?
by|Mar 20, 2017
1 Answer
Answer This Question
A: Hi Garry,
Thank you for your question. No, Diablo does not make an alignment tool. Hope this helps.