Q:I have a broken cover on my delta tub faucet. I only really need the cover. Someone replaced the valve itself last week but I think they snapped on the old cover. Will the rp28595 cover replace the jmi27249 cover?
by|Oct 23, 2022
1 Answer
Answer This Question
A: Hi William, thank you for your interest in the RP28595!
Feel free to contact us directly, so we can further assist you with this matter.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Digital Communications Specialist
by|Oct 25, 2022
Q:I found the temperature knob on the Home Depot website, the image (attacjed) shows the blue color followed by the red. Ours is red before the blue that makes sense to turn from hot to cold water. Is it mistake on the image on the Home depot website?
by|Jul 8, 2022
2 Answers
Answer This Question
A: Hi HomeDepotCustomer,
Thanks so much for contacting Delta Faucet Company!
The image is correct and is only positioned upside down. With the narrow end of the knob facing up you will naturally turn left for hot and right for cold.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
by|Jul 8, 2022
A: Do not know about your faucet, the picture is correct for mine. My faucet goes cold first then to hot from right to left {counter clockwise}.
by|Jul 9, 2022
Q:My shower was installed in 2008. Paperwork says Delta faucet (4" one lever model #522 in chrome.
Would this be the correct lever handle. If so what else would be required in order to repair?
Lever handle just fell off.
by|Apr 29, 2020
1 Answer
Answer This Question
A: Thank you for your question, Kenwood71! I do apologize your Delta shower handle has fallen off, but will be more than happy to help! Delta Classic model 522 is not a shower faucet. It is a lavatory sink faucet that does not use the RP28595 temperature knob. Feel free to contact us directly, so we can further assist you with this matter. I have included a link to out contact page below.
https://www.deltafaucet.com/service-parts/contact-us
Best Regards, Benjamin
by|May 6, 2020
Q:Does this include the screw to attach it to the existing faucet? When our original one came off the screw went down the drain.
by|Nov 18, 2018
3 Answers
Answer This Question
A: No, the screw is not included with this product.
by|Nov 19, 2018
A: As pricey as the plastic part is, sadly you must supply the required screw.
by|Nov 18, 2018
A: Hi, Bud!
Thank you for your question. The Delta RP28595 does not include the screw. The screw part number is RP32105.
Best Regards,
Rosanna
by|Nov 21, 2018
Q:I currently have a standard builder clear acrylic handle that I would like to replace. I'm not sure what series it would be. Does this handle work with all delta faucets?
by|Oct 17, 2018
3 Answers
Answer This Question
A: Worked on mines.
by|Oct 17, 2018
A: I installed this temperature control handle on my Delta Monitor shower faucet. I hope this helps.
by|Oct 18, 2018
A: Thank you for your question, MrsFixIt! This temperature knob is only designed to work with 1700 or 17 Series units. We would be more than happy to help you find a suitable replacement handle for your shower. Please feel free to call our customer service team at 1-800-345-3358 or email customerservice@deltafaucet.com.
Best regards, Jon
by|Oct 19, 2018
Q:installation instructions
by|Apr 4, 2017
2 Answers
Answer This Question
A: No
by|Oct 17, 2018
A: Hi bertster,
Thank you for your question. To install this lever, place the gray knob onto the stem of the cartridge, then tighten it down with a Phillips head screwdriver. Be careful not to over tighten the screw. You can then snap the cover onto the gray knob.
Please feel free to contact us at 1-800-345-3358 or email customerservice@deltafaucet.com if you have any further questions!
Best regards,
Jon
by|May 4, 2023
Q:Do I also need to buy Delta RP28595 shown here?
by|May 24, 2014
2 Answers
Answer This Question
A: I bought this set to be sure the mount for the handle would match. It works just fine.
by|Aug 6, 2019
A: Hi Efa1,
Thank you for your question. Delta Faucet model # RP28595 is the temperature knob and cover. RP32106 includes the cartridge and everything in front of it except the knob cover. The RP32106 is used over several series of faucets and the RP28595 is a specific handle cover for the classic series.
Thanks.
Jody