Questions and Answers for Delta Addison Single-Handle Pull-Down Sprayer Kitchen Faucet with MagnaTite Docking in Venetian Bronze

Name: Addison Single-Handle Pull-Down Sprayer Kitchen Faucet with MagnaTite Docking in Venetian Bronze
Brand: Delta

Internet #202517887

Model #9192-RB-DST

Addison Single-Handle Pull-Down Sprayer Kitchen Faucet with MagnaTite Docking in Venetian Bronze

Delta

(329)Questions & Answers (71)

Single-hole or 3-hole installation (deck plate included)
Delta MagnaTite Docking holds pull down sprayer firmly in place
Delta kitchen faucet backed by Delta’s Lifetime Limited Warranty

View Full Product Details

Questions & Answers

Q:Our delta kitchen faucet leaks when the handle is in the on position. How can we fix it?

by|Feb 3, 2023

1 Answer

Answer This Question

A: Hi Agt6, thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing! Please reach out to us directly so we can further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

by|Feb 3, 2023

Q:The cold water LED sensor is not working. What is the next step to correct the problem. Everything else works fine.

by|Jul 28, 2020

2 Answers

Answer This Question

A: Ours was installed as part of a kitchen overhaul two years ago. The LED had issues after the first week. Replaced entire unit. That LED lasted two weeks. No we just live with it. Red LED works for water flowing (has nothing to do with temperature at this point). Have 6 batteries handy at all times bc when the current set dies (without warning) you're also without water. Period. Hmmm, maybe the LED is supposed to warn of low batteries when working properly...

by|Jul 31, 2020

A: Dear Tommy, thank you for your question. I apologize for the issue that you have experienced and I am glad to help. This product carries a lifetime limited warranty that covers any parts, manufacturing, or finish issues that occur. Feel free to contact us directly and we will be glad to help you resolve this issue. Best regards, Tyler Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

by|Jul 28, 2020

Q:What soap dispenser matches this ?

by|May 18, 2020

1 Answer

Answer This Question

A: Thank you for your question, Bea! Delta Addison model 9192-RB-DST can be used with a Delta RP50781RB soap dispenser. Best Regards, Benjamin

by|May 20, 2020

Q:How far forward and back does the handle move? Some only move about 1", making it harder to adjust the temperature.

by|Feb 17, 2020

2 Answers

Answer This Question

A: Hi luvya09, Thank you for your question regarding the Delta Addison Pull-Down Kitchen 9192-AR-DST model. We recommend a minimum of 2 1/2" clearance is needed from the faucet to the back splash, for proper spacing for the handle rotation. Below is a specification sheet for the Addison model with the measurements: https://media.deltafaucet.com/SpecSheet/DSP-K-9192-DST%20Rev%20A.pdf Best regards, Tanya

by|Mar 4, 2020

A: Not very far , sometimes touchy to adjust hot water temperatures . Have had the unit in service for two years with no issues . Most single-handle faucets don't move very far .

by|Feb 17, 2020

Q:Can this be installed with the handle on the left?

by|Feb 17, 2020

2 Answers

Answer This Question

A: Hello luvya09, Thank you for your question. Yes, the handle of the Delta Addison Kitchen 9192-AR-DST faucet can be mounted so that it is on the left side, however, the hot and cold will be reversed. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

by|Mar 4, 2020

A: Yes, this can be installed with the handle on the left.

by|Feb 18, 2020

Q:How far back and forward does the handle move? Some only move about 1" in each direction, making it harder to be exact. This looks like it'd be that kind.

by|Feb 17, 2020

1 Answer

Answer This Question

by|Feb 18, 2020

Q:How strong is the pull down hose? Will it rip and leak over time? I have a Pfister faucet and we have had to replace the pull down hose twice in 3 years. It also is not a part that you can just purchase at home depot. It has to be special ordered from Pfister. I just want to nice faucet that will last a long time and not need parts to be replaced 6 months after owning.

by|Jan 17, 2020

4 Answers

Answer This Question

A: I have had this faucet for 2 years and I love it. The hose is very strong, no rips or leaks. I highly recommend this faucet.

by|Jan 18, 2020

A: Have not had any problem in 1 1/2 yrs. Very satisfied. The hose is not flimsy - very thick.

by|Jan 19, 2020

A: I had it for a few years now, and very happy with it. It does not leak anywhere (and I use it a lot), and looks great. I, personally, just regret that I did not get it sooner and suffered with a cheap Moët which was in the house when I bought it. Highly recommend.

by|Jan 18, 2020

A: 2 years no problem so far. Enjoing it every day

by|Jan 17, 2020

Q:Where spray nozzle is replaced into arm it has had a part rust out. Arm does not now fit snuggly into arm. Faucet is 2 years old . How do I fix or replace.

by|Jul 1, 2019

2 Answers

Answer This Question

A: I have had the same issue. It started to rust out about a year ago and has since rusted all the way through the magnet that holds the nozzle in place. Now the nozzle just hangs there. Very poor design.

by|Dec 24, 2019

A: Hi, Marsha. Thank you for your question. I am sorry to hear that your Delta 9192T-AR-DST faucet is rusting. The rusting you're describing can be caused by the magnet inside of the spout assembly. This part is RP80977. We would be more than happy to help you with this. Please feel free to call, email, or message us on social. Best regards, Rosanna Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

by|Jul 3, 2019

page 2