Q:Is the drain plug locked into place or can you easily twist and lift it out to clean, remove hair?
by|Dec 15, 2023
1 Answer
Answer This Question
A: Hi Abby,
Thank you for your question about the Delta Faucet model 594-CZMPU-DST.
To remove the stopper, turn the stopper 90 degrees to unlock it and then pull it straight up. The stopper has tabs that lock into the overflow holes.
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
by|Jan 7, 2024
Q:What is the height of the faucet, both on and off, WITHOUT using the escutcheon to cover extra holes?
by|Apr 28, 2023
1 Answer
Answer This Question
A: Hi CatMat,
Thank you for your question about the Delta Faucet model 594-SSMPU-DST.
The escutcheon adds 17/32", so the height is 7 5/8" without the escutcheon and 8 1/8" with the handle up.
Please reach out if you have any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
by|May 1, 2023
Q:If my sink countertop has 3 holes, will this cover the other 2 holes?
by|Oct 9, 2022
1 Answer
Answer This Question
A: Hi WonderingWalt,
Thank you for your question about the Delta Faucet model 594-RBMPU-DST.
The included optional escutcheon plate will cover three holes with 4" between their centers.
Please contact us directly if you have any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
by|Oct 11, 2022
Q:What is the maximum deck thickness for installation of this faucet?
by|Jan 21, 2020
1 Answer
Answer This Question
A: Thank you for your question, Kay! The required maximum deck thickness for the installation of model 594-RBMPU-DST, is 2 1/2" inches. I have included a link to the technical specifications for model 594-RBMPU-DST, for you to refer to.
https://images.homedepot-static.com/catalog/pdfImages/d7/d75ad77b-f68f-4682-8dac-b1a868fca8c0.pdf
Best Regards, Benjamin
by|Jan 22, 2020
Q:Can I use this faucet with a "semi vessel" sink? This sink rises only 2 or 3" from the countertop. I checked the specs and am not worried about the height of the spout, rather my concern is that there are no overflow holes in my Talavera sink. Please advise. Thanks.
by|Nov 1, 2019
1 Answer
Answer This Question
A: Thank you for your question, Sammy. The Delta Linden Lavatory 594-SSMPU-DST faucet is a single handle faucet without a riser. If you use a push pop-up drain assembly, you will not need to use the pop or lift rod included with the faucet. A push pop-up drain allows you to close or open the drain by pressing on the stopper. Please be aware that both drain types are sold with or without overflow holes, depending on the sink you are using.
http://www.deltafaucet.com/search/results.html?q=RP4764%2C+RP6346
http://www.deltafaucet.com/search/results.html?q=72173%2C+72172&num=20
Best regards,
Tanya
by|Nov 6, 2023
1 found this answer helpful
Q:What is the minimum clearance required between the edge of the faucet and the wall backsplash?
by|Feb 22, 2019
1 Answer
Answer This Question
A: Thank you for your question, MO. The minimum recommended clearance from the center of the faucet to the backsplash is 2 1/2".
https://images.homedepot-static.com/catalog/pdfImages/d7/d75ad77b-f68f-4682-8dac-b1a868fca8c0.pdf
Best regards, Jon
by|Feb 24, 2019
Q:Does the champagne bronze color hold up? I have a oiled rub bronze and the finish on it is peeling and turned greenish in color. Is the finish painted on?
by|Apr 11, 2017
1 Answer
Answer This Question
A: Dear Sputnick,
Thank you for your question. We would be more than happy to assist you with any issues you are having with your Delta faucet. Please call the toll-free Delta Help Line at 1-800-345-3358 between the hours of 7:00 AM to 7:00 PM Monday ~ Friday as well as 9:00 AM to 6:00 PM Saturday EST. You can also contact us via email at customerservice@deltafaucet.com.
Best regards,
Tanya
by|May 4, 2023
Q:How much room is needed behind the faucet for the lift rod to work to allow water to be held in the sink?
by|Feb 2, 2017
1 Answer
Answer This Question
A: Thank you for your question, Cap. We recommend having 2 1/2" of clearance between the center of the faucet and the backsplash. Please see the Specification sheet for this and other measurements.
Best regards,
Jon