Q:Can this register be installed in a floating floor (bamboo), as it will not be possible to have an expansion gap where the floor meets the register fram.
by|Jul 12, 2021
1 Answer
Answer This Question
A: Hi Leo
If you have not already contacted your local Home Depot store flooring dept that might be a good resource. Another option is to call the manufacturer Decor Grates at (800) 903-9036 for assistance. I hope this is helpful. . We appreciate your business and look forward to serving you in the future.
Thank you for shopping Home Depot!
by|Jul 30, 2021
Q:How thick is product fully assembled? I have hard wood flooring.
by|Jul 7, 2020
1 Answer
Answer This Question
A: This item is made for 3/4" flooring. However, if you have an existing hardwood floor, it's much more difficult to install a flushmount register. Please refer to instructions before purchasing the item. The frame around the actual floor register would need to fit flush with your wood flooring, so your would need to make sure the opening in your wood floor is cut to accept this frame. The cut opening needs to be centered with the actual vent opening, so that the damper box will fit in the vent opening, when you place the register inside the frame.
by|Jul 10, 2020
Q:Can the box damper be removed from the wood vent?
by|Jun 14, 2020
1 Answer
Answer This Question
A: The damper box is nailed to the wood vent using brad nails. If you remove it, then want to re-attach it, you would need to use small brad nails or small screws. FYI - there is also an unfinished natural oak, which uses screws to attach the damper box, so you can remove the damper box to stain the wood, then re-attach, using the same screws.
by|Jun 18, 2020
Q:I already have holes in floor with wooden vents but I want flush - can I buy these flush mounts and just drop in hole? Or do they require sawing, etc for installation? Need 4
by|Mar 1, 2020
1 Answer
Answer This Question
A: There are installation instructions in PDF format on the product page. The frame needs to be integrated into your wood floor, so there is cutting and sizing required.
by|Mar 5, 2020
Q:What are the dimensions of the insert
by|Aug 19, 2019
1 Answer
Answer This Question
A: The outside dimensions of the frame are 13.5 in by 7.5 in. The outside dimensions of the register are 11.5 in by 5.5 in, and the register fits inside the frame. Please see instructional PDF on product page for installation. The level of skill required is at least advanced DIY.
by|Aug 19, 2019
Q:Where is this made?
by|Mar 7, 2019
1 Answer
Answer This Question
A: It's made in Canada.
by|Mar 7, 2019
Q:Thickness?
by|Nov 2, 2018
1 Answer
Answer This Question
A: The thickness of the wood is 0.475 inches.
by|Sep 13, 2019
1 found this answer helpful
Q:My vents are right next to the wall is there a red oak vent that I can use?
by|Jun 1, 2017
1 Answer
Answer This Question
A: This is made of American Red Oak. There is an unfinished version, which can be stained to match flooring more closely.