Questions and Answers for DEWALT 20V MAX Cordless 1/2 in. Impact Wrench Kit with Detent Pin, (2) 20V 4.0Ah Batteries, and Charger

A:  The DEWALT 20V batteries are interchangeable with the DEWALT 20V tools.

A:  DEWALT complies with federal, state and local laws regarding its products. One such law exists in California called Proposition 65, that requires the manufacturers of products to warn those people who use the product if the user can be exposed to certain chemical substances while using the product. The list of chemical substances can be found in the Proposition 65 law, and can be changed periodically by the State of CA. DEWALT products are made from many materials necessary to the proper functioning of the product. For example, many electrical cords are made from a rubberlike material called polyvinyl chloride (PVC), and that PVC often contains lead., which is necessary in the PVC to withstand heat and keep the cord flexible. Because of the lead in the electrical cord, a warning must be placed in the instruction manual in order to comply with the Prop 65 warning requirement. However, because DEWALT cannot distinguish the products it sells in California from the products it sells in the other 49 states, it must put the warning in its owner's manual on every product it makes in order to make sure it is complying with the California law. Additionally, since the use of a DEWALT product can result in contact with other materials, such as lead based paints or crystalline silica from bricks and cement, DEWALT must provide the warning for the possibility that the material on which the product is being used might contain any of the Proposition 65 list of chemicals.

A:  The gears are not metal.

A:  Yes, All DEWALT 20V batteries and all DEWALT 20V tools are compatible. Please note some tools require more power than others, so a higher Ah/Amp battery will provide longer runtime.

A:  Probably not . It's designed to drive in screws .   Get an impact wrench which has bigger torque 

A:  Hi Jewl. Yes, The Impact Driver will work fine for removing lug nuts. Michelle, DEWALT Social Media Rep

A:  It does loosen the lug nuts on my camper, which are torqued at 100.

A:  While not intended for such application, this Dewalt 1/4” driver tool may actually be strong enough to loosen lug nuts on smaller car.  But I doubt you will find a 1/4” drive socket up to the task.  Dewalt makes both 3/8” and 1/2” drive impact wrenches and one of those tools would be more appropriate for your intended use.

A:  Not really the right tool for the job. It might work. But I would not do that to my unit.

A:  If you're drilling holes into the concrete you'd be better off with a hammer drill.

A:  We would recommend using a hammerdrill for this application.

A:  Yes, the DCB609 will fit the DCF880B.

A:  Hello Jamie. Yes, the DCB609 FLEXVOLT Batteries are compatible with all DEWALT 20V tools. Thank you DEWALT

A:  Yes

A:  Yes, as long as it’s 20 volt Dewalt 

A:  Yes, it’s the battery that I use on all 4 of my DCF887 because it makes the impact more lightweight, which helps on the wrist while using it all day to help prevent wrist pain. 

A:  Yes 

A:  Yes, it just has a shorter run time.

A:  Yes

A:  I'm sure it works and works well,