Questions and Answers for DANCO 2-7/8 in. Bath Grid Strainer with Screw in Chrome

A:  The screw length is 1.5" and it easily reached the basket to screw it into. It took a minute to install and fit perfect.

A:  About 2.5"

A:  Thank you for your interest in Danco products and your inquiry. Our Danco, 89269, 2-7/8 inch Shower Drain Strainer comes with a screw that is 1-3/4 inches in overall length.

A:  About 1.5 to 2 inches (from memmory)

A:  One & three quarters of an inch. Be careful to check screw threads per inch, mine would not work

A:  LONG ENOUGH TO MAKE AN EASY CONNECTION

A:  Thank you for your interest in Danco products and your inquiry. Our Danco, 89269, 2-7/8 inch Shower Drain Strainer comes with a screw that is 1-3/4 inches in overall length.

A:  The screw is 1-3/4" long.

A:  Thank you for your interest in Danco products and your inquiry. Our Danco, 88926, 2-7/8 in. Tub/Shower Strainer for Gerber, would be installed by removing the screw from your existing grid drain strainer. Then you would remove the existing grid drain strainer. Insert the new grid strainer. Then tighten the new screw to secure the new grid strainer to the bath drain shoe.

A:  It simply screws in to place, the tub drain hole has a threaded hole in the bracket beneath the cover plate.

A:  It couldn’t be easier. You screw it in. If there is an existing one you unscrew that one and then screw this one in.

A:  In your bath tub there should be a strainer that is about an inch deep, this strainer fits over it and the screw goes right into the basket. I installed mine in about a minute and it looks much nicer plus it makes it easier for cleaning.

A:  Just screw it in. Very simple.

A:  Thank you for your inquiry. This finish is Oil Rubbed Bronze.

A:  This is an excellent question,. I've actual found' depending on how New Or How old the tub is' it Will very' #10 and #14 and once a larger size which resulted in making the Tub drain screen screw whole bigger in size, and it wasn't an older tub.

A:  Thank you for your inquiry. The screw included with this strainer is #10-24 x 1.5".

A:  a 2 inch screw

A:  No screw- I used the one that was already in the drain

A:  1 3/4 inches