#1 Home Improvement Retailer

Questions and Answers for Coastal Shower Doors Newport 58 in. to 59.625 in. x 70 in. Framed Sliding Shower Door with Towel Bar in Matte Black and Clear Glass

Internet #205467431

Model #1658.70O-C

Questions & Answers

227Questions
caret
Q:What are the dimensions of the doors (each) in the 42 inch and 44 inch size? my current opening is 43 7/8 with 23 inch wide x 70 inch high doors
by|Aug 28, 2023
1 Answer
Answer This Question

A:  The glass width never changes, regardless of the size of your opening. To fit this unit into an opening less than 43-5/8" wide, you would need to trim the top and bottom rails per the instructions in the manual, but the glass width will never change. The actual width of just the glass for each glass door is approximately 20". There will be some framing on the glass and the wall jambs will also take up some space, but to be clear on the specifications, this model will fit a finished opening width that is between 42" - 43-5/8". If you have any other questions, please feel free to reach out to our team at 1-800-874-8601 between 8am-5pm EST, Monday-Friday. Thank you for your interest in Coastal Shower Doors!

by|Aug 28, 2023
    caret
    Q:my bathroom opening is 41.5 inches. Can we cut this to fit 41.5 opening?
    by|Aug 9, 2023
    1 Answer
    Answer This Question

    A:  We do not recommend trimming this model down below the 42" minimum. If you have any other questions, please feel free to reach out to our team at 1-800-874-8601 between 8am-5pm EST, Monday-Friday. Thank you for your interest in Coastal Shower Doors!

    by|Aug 9, 2023
      caret
      Q:I didn?t receive the packet to attach the doors. No screws or brackets etc
      by|May 30, 2023
      1 Answer
      Answer This Question

      A:  For further assistance with getting the parts you need for installation, please reach out to our team at 1-800-874-8601 between 8am-5pm EST, Monday-Friday. Thank you for your interest in Coastal Shower Doors!

      by|Jun 1, 2023
        caret
        Q:The distance of my wall to wall opening is 64". Is this the correct sized door to use for my project? If not, which width do I need? Height is not a concern.
        by|Apr 19, 2023
        1 Answer
        Answer This Question

        A:  This Newport shower door product has a minimum width tolerance of 64" and a maximum tolerance of 65-5/8". Please measure your finished opening carefully before placing your order. We recommend taking width measurements in 3 locations - the top, middle, and bottom of the opening. As long as none of your measurements are less than the 64" minimum tolerance, this 64" - 65-6/8" model size will fit your space. If you have any other questions, please feel free to reach out to our team at 1-800-874-8601 between 8am-5pm EST, Monday-Friday. Thank you for your interest in Coastal Shower Doors!

        by|Apr 19, 2023
          caret
          Q:How long is the header piece that comes with the 54? door?
          by|Apr 11, 2023
          1 Answer
          Answer This Question

          A:  The header that comes with this unit will need to be trimmed to size if your opening is any less than 55-5/8" wide. The header will fit a 55-5/8" wide opening right out of the box. If you have any other questions, please feel free to reach out to our team at 1-800-874-8601 between 8am-5pm EST, Monday-Friday. Thank you for your interest in Coastal Shower Doors!

          by|Apr 11, 2023
            caret
            Q:shower pan is out of level can the bottom track be installed?
            by|Feb 28, 2023
            1 Answer
            Answer This Question

            A:  The shower base must have a level threshold to be able to properly install the shower door. This model has adjustment for out-of-plumb walls, but does not have any adjustment for a non-level threshold. If you have any other questions, please feel free to reach out to our team at 1-800-874-8601 between 8am-5pm EST, Monday-Friday. Thank you for your interest in Coastal Shower Doors!

            by|Mar 1, 2023
              caret
              Q:Our shower opening is 57 1/2"W X 70"H. I ordered a 60-61.625 X 70" Newport. Did I order the correct size?
              by|Feb 22, 2023
              1 Answer
              Answer This Question

              A:  Unfortunately, this 60" - 61-5/8" model model size will be too large for your 57-1/2" opening. Please get in contact with Home Depot if you need to cancel your order and order a different product that will be the right size for your space. If you have any other questions, please feel free to reach out to our team at 1-800-874-8601 between 8am-5pm EST, Monday-Friday. Thank you for your interest in Coastal Shower Doors!

              by|Feb 24, 2023
                caret
                Q:Could I buy this shower door with a handle to Open rather than a bar?
                by|Feb 18, 2023
                1 Answer
                Answer This Question

                A:  Unfortunately, no - we do not have any alternative hardware options for this shower door model at this time. If you have any other questions, please feel free to reach out to our team at 1-800-874-8601 between 8am-5pm EST, Monday-Friday. Thank you for your interest in Coastal Shower Doors!

                by|Feb 20, 2023
                  caret
                  Q:How do you measure for shower door Do you make a framed one piece panel?
                  by|Feb 18, 2023
                  1 Answer
                  Answer This Question

                  A:  Please make sure your opening is finished and completely ready to accept a shower door before measuring your space. To measure your finished opening, we recommend taking width measurements in 3 locations - the top, middle, and bottom. To measure the height, start with your tape measure on the top of the shower curb and extend it up to the highest point of your finished wall. Once you have these measurements, our team can help you make an appropriate selection and we can narrow down the types of products that will work for your space. If you have any other questions, please feel free to reach out to our team at 1-800-874-8601 between 8am-5pm EST, Monday-Friday. Thank you for your interest in Coastal Shower Doors!

                  by|Feb 20, 2023
                    caret
                    Q:What is the door size when ordering for 52 opening? Is there a vinyl seal on the side doors to prevent water leaking between the doors? How much of an overlap is there on the doors? opening is 51.5.
                    by|Jan 30, 2023
                    1 Answer
                    Answer This Question

                    A:  Unfortunately, we do not offer a Newport shower door model size that will fit a 52" opening. We apologize, but we are not entirely sure what size your finished opening is from the information you provided so we invite you to reach out to our team at 1-800-874-8601 for further assistance with your questions. Our normal office hours are between 8am-5pm EST, Monday-Friday. Thank you for your interest in Coastal Shower Doors!

                    by|Jan 30, 2023

                      Frequently Bought Together

                      +
                      +
                      Price:
                      $538.81