A: Good Day,
This would depend on your electricity costs in your area. Are you wiring it 240V or 208V? When the heater is on it will pull the wattage determined by the voltage.
Thank You
Glen Dimplex Americas
Customer Service
by|Mar 11, 2024
Q:what gauge steel is used?
by|Dec 31, 2023
1 Answer
Answer This Question
A: Hi baseboardheater,
Case, cover, and deflector are made of 24 gauge steel with 20 gauge junction boxes. Glen Dimplex Americas Customer Experience Team.
by|Jan 2, 2024
Q:can this unit be mounted to a wooden wall? Owner manual doesn't say.
by|Dec 16, 2023
1 Answer
Answer This Question
A: Hi 802K,
Please ensure to follow the install instructions when installing. Yes, this can be installed on a wooden wall, please ensure it is not installed against combustible low-density fiberboard. Glen Dimplex Americas Customer Experience Team.
by|Dec 18, 2023
Q:If the draw on this heater is only 3.1 amps I should be able to run a 14/2 wire and use a 15 amp breaker for it right?
by|Dec 15, 2023
1 Answer
Answer This Question
A: Hi Pedro,
You can run 14/2 wire at 15 amps for this unit. Always keep in mind that a circuit breaker should never exceed 80% of its max amperage. Glen Dimplex Americas Customer Experience Team.
by|Dec 18, 2023
Q:Can 36 in. 240/208-volt 750/563-watt Electric Baseboard Heater install with single-pole breaker ?
by|Sep 25, 2023
1 Answer
Answer This Question
A: Hi John,
Adding a 240-volt baseboard heater will require a new 20 amp double-pole circuit breaker. Please consult a licensed electrician to help with install. Glen Dimplex Americas Customer Experience Team.
by|Sep 26, 2023
Q:What's the wiring schematic for the 240 volt connectionronald
by|Jun 19, 2023
1 Answer
Answer This Question
A: Hi Ron,
Please contact Customer Service directly at 1-888-346-7539, Monday to Friday 8am to 4:30pm EST so they can help guide you.
Glen Dimplex Americas Customer Experience Team
by|Jun 20, 2023
Q:Where can I find the chart that matches room size to heater size? Thanks
by|Jan 23, 2023
1 Answer
Answer This Question
A: Hi Vwpassat,
You will have to find a heat calculator. The general rule is 7 to 10 watts per square foot for a well insulated room. Glen Dimplex Americas Customer Experience Team
by|Oct 5, 2023
1 found this answer helpful
Q:(30 in. 240/208-volt 500/375-watt Electric Baseboard Heater in White) Can I use 10/2 wire that available from moving a hot water heater ?
by|Dec 23, 2022
2 Answers
Answer This Question
A: Yes, I would recommend changing the breaker to 20A 2 pole. It will work on the existing 30amp 2 pole breaker.
by|Sep 6, 2023
A: Hi Donald,
You can use the 10/2 wire but it is huge and a bit more than needed but it can be used. Glen Dimplex Americas Customer Experience Team