Questions and Answers for Broan-NuTone Easy to Install 80 CFM Bathroom Exhaust Fan with LED Clean Cover, ENERGY STAR

A:  Bro it’s a fan… it costs about 5 cents per day to run a fan for 24 hours straight I don’t think they make “energy star” fans lol 

A:  Hi Boii, Thank you for your question on model ARN110LKVV. Unfortunately, this model is not Energy star certified.

A:  Hi Gigi, Thank you for your question on the AERN80LK model. This model is a fan and light only. It does not offer any type of humidity or motion sensing feature. We would recommend that you recheck your model number and contact Technical Support directly for more assistance at 888-336-6151.

A:  Hi ARN110LKVV, Thank you for your question on the ARN110LKVV model. This model would require a two function wall switch. One switch for the lights, one switch for the fan. The white light and SurfaceShield mode are on one switch, and the fan wiring would be on the second switch. If you have further questions, please contact Technical Support directly at 888-336-6135.

A:  Not to my knowledge. I have not disassembled the light to attempt such a change. I installed two of these in my new house. One switch to control the fan, one switch to control the light. Flip the light on first, its white, flip again promptly and its the UV light. If you dont want the UV light, I suggest purchasing a lower cost unit that does not have the UV feature, rather than trying to disable it. Maybe I'm not understanding your intent. I don't understand why this would be considered or necessary.

A:  Hi Mazio, Thank you for your question on the model ARN110LKVV ventilation fan. When the light is shut off, it will automatically return to the white light mode. When the light switch is toggled off and back on, it will then come on with the violet light. Please contact Technical Support directly for more assistance at 888-336-6151.

A:  Hi BigD, Thank you for your question about model AERN80LK Exhaust Fan with LED Clean Cover. We would recommend a two function controller like our model P2RW to control your fan and light separately. If you have further questions please reach out to our Technical Support Team at 888-336-6151. They would be happy to assist you.

A:  I think it would be. The fan is not as quiet as I thought it would be. 

A:  Plenty bright for that small toilet room

A:  That is all the lighting I have in my separate bathroom off the shower area. I assume you are planning for a separate exhaust fan for the shower area. 

A:  Hi Art129, Thank you for your question on the AERN80LK ventilation fan and light. This model offers a 3500K LED light. This is more of a natural white light. Whether or not this light would be enough for your room is subjective and would be something you would need to determine based on your application and room lay out.

A:  Thank you for the question about model AERN80LK Ventilation Fan with LED Light. The dimmable LED is rated at 3500K as a warm to bright light listed on the CCT chart.

A:  Kelvin number is definitely closer to Daylight.

A:  Hi Seabass, Thank you for your question on model AERN80LK. We are sorry to hear you are having an issue. You may want to be sure the damper on the unit is opening and closing freely. If the issue is not with the damper, You would need to look at the duct work. Please call our Technical Support Team directly at 888-336-6151 for additional troubleshooting assistance.

A:  Do a flow test. With door open hold a square of toilet paper to fan and see if it pulls in, close the door and do test again. If it does not stick, the bathroom door does not have enough of an under cut. If air can’t enter the bathroom steam can’t exit. 

A:  The fan will move a lot of air.  If it is not, the likely cause is a restricted outlet or collapsed vent ducting.  To troubleshoot, turn on the fan and using a small strip of paper held up to the vent cover, see if the fan is pulling a draft (the thin strip will suck up toward the fan).  You can check this with the bathroom door open and closed.  Sometimes the inlet air is constrained by the closed door; cracking the door open might help.  If that does not help, then the air outlet may be restricted.  Could be the back flow flapper valve is stuck closed, or the exterior exhaust outlet is restricted, or the ducting from the blower to the outside has a restriction.  

A:  Hi Jenn, Thank you for your question on model ARN110LKVV. The housing for this unit measures 9-1/4" x 10" x 5-3/4". You would need to make the necessary adjustments to your ceiling to use this model.

A:  Yes it can. I wired both together when i installed the fan. Works great.

A:  Hi georgia, Thank you for your question on the ARN110LKVV ventilation fan with LED light and SurfaceShield light. Both of the lights should be on one switch and the fan on a second switch. You will need to toggle the light switch to change between to the two light modes.

A:  Yes it runs of a single light switch. 

A:  No, I don’t believe so.