Questions and Answers for Broan-NuTone 50 CFM Ceiling Bathroom Exhaust Fan with Incandescent Light

A:  Hi davidj, Thank you for your question on model 796RFT. This would not be a direct replacement for the 763RLN. You would need to replace the housing and make the necessary changes to your ceiling.

A:  Hi Evelyn, Thank you for your question on the model 763N fan and light. First , remove the light lens. You can use a flat blade screwdriver to help pry it out if you need to. Next, remove the light bulb. Behind the bulb is a nut in the center of the reflector assembly. Remove the nut, while holding the grille to the ceiling with your other hand. Once you remove the nut, the reflector and grille can now be lowered and removed for cleaning.

A:  I held a piece of copy paper up to it and it looks white to me.

A:  I have 1 and it's white, I'm not sure if they have other colors but they do have white

A:  Hi Janny, Thank you for your question on model 763N. This model is described as having a white Grille. However, it is not the crisp white that is common on most of todays ceilings.

A:  It works great. Had a handyman install it.

A:  Hi LR2023, Thank you for your question about model 763N Exhaust Fan with Light. This model uses one 100 Watt maximum A19 size bulb.

A:  A19.  100W max

A:  Does the bulb have to be one of the 4 brands listed on the fan? They are hard to find.

A:  Hi LR2023, Thank you for your question on the model 769RFT. This model requires one 13-Watt energy efficient fluorescent bulb (sold separately). Our part number for this bulb is 97016889. For further assistance, please contact Customer Service at 800-558-1711.

A:  Hi intone, Thank you for your question on the 769RFT fan and light unit. The motor assembly for your 769RL is part number 0504B000. The grille assembly with the light lens is part number 85315000. The reflector assembly with the socket is part number 61604000.

A:  Hi Alan, Thank you for your question on model 763N. This unit is UL Listed for use over tub or shower with a GFCI circuit. However, it is not wet-rated and should not be installed where it may come in direct contact with water. If you have additional specification, application or installation questions, please call our technical department directly at 888-336-6151.

A:  Hi Judith, Thank you for your question on the 763N ventilation fan with light. We recommend that you use only the type of bulb recommended for your ventilation fan/light. You should know that using the LED will not void the warranty; however, we cannot guarantee the life of the bulb. Your LED bulb should be listed by a certification body such as UL, CSA, or ETL. They should also be marked suitable for enclosed fixtures. For more assistance, please contact our Technical Support department directly at 800-637-1453.

A:  Hi Will, Thank you for your question on the 763N ventilation fan. First, remove the light lens by gently depressing the sides and pulling it down. A flat blade screw driver can help you pry out the lens if needed. Next, remove the bulb. Behind the bulb you will see a nut. Remove the nut in the center of the reflector and lower the assembly. The grille and reflector are separate parts, so be sure to hold them both with one hand while unscrewing the nut. Unplug from the white receptacle and you can now lower the grille to clean it and vacuum out the inside of the housing.

A:  Yes it can 

A:  Hi Patti, Thank you for your question on the 763N ventilation fan and light model. Yes, the cover can be removed for cleaning. First, remove the light lens by gently depressing the sides. A flat blade screwdriver can be used to gently pry the lens out if you need to. Second, remove the bulb. Next, remove the nut in the center of the reflector while hold the reflector and grille up with your other hand, then unplug the plug from the white receptacle. Finally, you can now lower the grille and reflector to clean the cover and the inside of the housing.

A:  Well since the cover isn't attached prior to installing my guess is yes.