A: Hi mama, Thank you for your question on the 433011 range hood. The max blower airflow is the rated cfm of the blower by itself. One installed in the hood the cfm will change depending upon how the hood is ducted. Using a 7" round vertical discharge, you will be able to achieve 240 cfm's. If you have further questions, please contact our Technical support team directly at 800-637-1453.
A: This is a convertible range hood. It can be ducted or non-ducted. You will have four ducting options: 3-14" x 10" vertical; 3-1/4" x 10" horizontal (through the back); 7" round vertical; or non-ducted. If you require a non-ducted installation, you must purchase the charcoal filters separately.
A: The size is: Product Depth (in.) - 17.5 in Product Height (in.) - 6 in Product Width (in.) - 30 in
A: The dimensions for the 433001 are as follows: 30" x 17-1/2" D x 6" H.
A: It is designed for use with a 7" round duct. You could use a 7" to 6" reducer. Doing so could increase the sone level and/or possibly reduce the number of CFM.
A: Yes led bulbs can be used
A: We would recommend that you use the bulb that is recommended. Due to the higher heat generated by cooking and the type of controls used on some hoods, only hood products sold with CFL or LED lighting should be used with these technologies. Substituting an incandescent bulb with a CFL or LED may produce less than satisfying results, as heat has a major impact on the operating life of these bulbs and improper controls can cause flickering in low light settings.
A: Due to the higher heat generated by cooking and the type of controls used on some hoods, only hood products sold with CFL or LED lighting should be used with these technologies. Substituting an incandescent bulb with a CFL or LED may produce less than satisfying results, as heat has a major impact on the operating life of these bulbs and improper controls can cause flickering in low light settings.
A: This is a convertible range hood. It can be ducted or non-ducted. In a ducted installation, the vent cover would stay in place. If you are doing a non-ducted installation, then the cover is removed and the grilles would be exposed. If you still have questions, please contact our Customer Service Department at 800-558-1711. Thanks.
A: yes
A: Yes it does but there is a plastic diverter that can be used so that it blocks this vent and vents up the top.
A: Yes. The plastic diverter is covering it.
A: Yes it does but it comes with a cover if you dont want to use the vents on front.
A: A complete installation guide can be viewed via a link on the right-hand side of the product page in order to help you determine if this product will suit your project needs.
A: Yes. This is a convertible range hood. It has four (4) ducting options. You decide at the time of installation which will be best for your project/installation. It can be installed with 3-1/4" x 10 Vertical, 3-1/4" x 10 Horizontal, 7" round (vertical), or non ducted. If you do a non-ducted installation, it will require charcoal filters (purchased separately). Thank you.
A: yes.
A: Yes. That is one option.
A: Yes. It has several different cut-out areas allowing you to customize. Simple to do with a pair of plyers. The metal is perforated. Mine is vented on outside wall. Took 15 minutes to install
current item | ||
Range Hood Size (Width) | ||
---|---|---|
30 in. | 30 in. | 30 in. |
Vent Install Type | ||
Convertible | Convertible | Ductless |
Features | ||
Dishwasher Safe Metal Mesh Filter, Lighted, Removable Grease Filter(s) | Charcoal Filter, Lighted | Lighted, Removable Grease Filter(s) |
Amperage (A) | ||
1.8 | 0.43 A | 2 |
Maximum Air Flow Capacity (CFM) | ||
178 CFM | 0 CFM |
How can we help?