#1 Home Improvement Retailer

Questions and Answers for BrassCraft 3-1/2 in. Garbage Disposal Flange in White

Internet #205214741

Model #BC7125 W

  • Brass construction ensures durability
  • Suitable for sink applications
  • Designed to enable hassle-free installation

Questions & Answers

8Questions
caret
Q:Is the 3 1/2 the opening of the flange
by|Feb 19, 2019
2 Answers
Answer This Question

A:  Yes, the diameter of the opening is 3.5 inches.

by|Feb 22, 2019

    A:  Hi Marty, the 3 1/2 inch measurement is the outer diameter and the inner diameter is 1 3/4 inches. If you have any additional questions or concerns please do not hesitate to reach out to our Customer Support Team directly at 877-272-7755.

    by|Feb 22, 2019
      caret
      Q:Does this fit Badger models?
      by|Oct 15, 2018
      1 Answer
      Answer This Question

      A:  Hello SM-This s a very good question, yes the BC7125 SS does work with the InSinkErator Badger series. Call our Customer Support Team at 877-272-7755 if there is anything we can help you with.

      by|Oct 22, 2018
        caret
        Q:Does this flange fit all Insinkerator models?
        by|Jan 26, 2018
        1 Answer
        Answer This Question

        A:  Hi sjc - This flange fits InSinkerator, KitchenAid, Emerson, Kenmore, and Grainger garbage disposals. It will fit standard disposals with an inner diameter of 1-3/4" and an outside diameter of 3-1/2". If your model has a different inner and outer diameter, this flange will not fit. If you need further assistance please contact our Customer Support Team at 877-272-7755.

        by|May 5, 2023
          caret
          Q:Will this fit a Moen disposal?
          by|Oct 29, 2017
          1 Answer
          Answer This Question

          A:  Hi Neuby - Thank you for your question. This garbage disposal flange is for use with InSinkerator, KitchenAid, Emerson, Kenmore, and Grainger garbage disposals. Please contact our Customer Support Team at 877-272-7755 with any other questions.

          by|May 5, 2023
            caret
            Q:Do the flange just snap in place
            by|May 16, 2017
            3 Answers
            Answer This Question

            A:  This unit does not snap into place, it slips in through the sink opening and is held in place by the disposal hardware.

            by|Jun 22, 2020
              1 found this answer helpful

              A:  The flange will fit into place but not snap in.

              by|Jun 22, 2020
                1 found this answer helpful

                A:  Hi Larry - Thank you for your question! There are threads on the bottom of the flange. It can be pushed down and threaded to your connection piece under your sink using a thin application of plumbers putty will help insure a tight seal. If you have any further feedback, questions, or concerns, please don’t hesitate to reach out to our Customer Support Team toll-free at 877-272-7755

                by|Jun 22, 2020
                  1 found this answer helpful
                  caret
                  Q:Does it just snap in place
                  by|May 16, 2017
                  2 Answers
                  Answer This Question

                  A:  Hi Larry - Thank you for your question! There are threads on the bottom of the flange. It can be pushed down and threaded to your connection piece under your sink using a thin application of plumbers putty will help insure a tight seal. If you have any further feedback, questions, or concerns, please don’t hesitate to reach out to our Customer Support Team toll-free at 877-272-7755

                  by|May 4, 2023

                    A:  it will fit a 3 1/2 inch opening but it doesn't come with the bottom slip ring, what you see is what you get. So make sure to save the old one you remove.

                    by|May 5, 2023
                      caret
                      Q:have bisque color
                      by|Dec 18, 2016
                      1 Answer
                      Answer This Question

                      A:  Dear Pat, Thank you for your inquiry! We do not offer this item in bisque at this time. If we can be of any further assistance, please reach out to our Customer Support Team toll-free at 877-272-7755.

                      by|May 4, 2023
                        caret
                        Q:Will this replace the flange of the Kitchenaid Kadette 250 (Model# KCDB250S1)?
                        by|Feb 28, 2016
                        1 Answer
                        Answer This Question

                        A:  Hi Mike H - Thank you for the question. We haven't tested this product for that specific model; however, these are the measurements of the product that you can confirm if the product will fit your application. The flange measures 4-1/2 in. O.D. the collar measures 3-1/2 in. O.D. and 1-3/4 in. deep. Hope this helps. If you have additional questions please do not hesitate to contact our customer support team toll-free at 877-272-7755.

                        by|May 3, 2023