Q:In several places you mention a SPINE extension and others a SPLINE extension. can you tell me the difference? Or is SPINE just a typo?
by|Apr 22, 2020
1 Answer
Answer This Question
A: The HC7507 is interchangeable core bits work with SDS-max® or Spline adapters. If you saw a word "Spine", it is a typographical error and we apologize for the confusion. We will have it corrected. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
by|Apr 23, 2020
Q:Planning to put weeping holes on a poured concrete retaining wall
by|May 19, 2019
4 Answers
Answer This Question
A: Thanks for the question. The HC8526 Core Bit has a usable length of 17 inches, however if you will drill a slab, it may take time due to the hardness of the material. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
by|May 21, 2019
A: Yes
by|May 21, 2019
A: Very easy. Just need to use a hammer drill that is powerful enough to run this bit. Just make sure there's no rebar inside the wall where you want to drill.
We use this for everyday drilling through concrete, block, brick and stone.
by|Jul 5, 2021
1 found this answer helpful
A: I would think so because I am an Electrical Contractor and have used our bit on 8" Concrete Foundation Walls.and the results were nice clean holes for our running conduit thru, after many uses the bit still cuts with No Problem.
Best of Luck
Joe
J.E.B Electric, Inc.
(303) 472-1871
by|May 21, 2019
Q:Will this cut through rebar?
by|May 11, 2019
2 Answers
Answer This Question
A: Hi there! The HC7507 Core bit is not designed for rebar cutting. You may check https://www.boschtools.com/boschtools-search/us/en/search/search.htm?searchTerm=rebar+cutter for more options on your application. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
by|May 13, 2019
A: It can but the drill may end up hurting an arm when it catches on ya. Don’t push to hard and let the bit do the work. Go slow and be patient. It may damage bit as well.
by|May 13, 2019
Q:what is the max depth i can core with this bit?
by|Dec 12, 2018
1 Answer
Answer This Question
A: Thank you for your question. The HC8536 Core Bit has a maximum depth or useable length of 17". For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
by|Dec 13, 2018
Q:Will this bit fit a Bosch rh328 vc?
by|Nov 14, 2018
2 Answers
Answer This Question
A: Thank you for your question. The HC8526 Core Drilling Bit is an SDS-max bit and will not fit the RH328VC SDS-plus tool. You can check out the SDS-plus core bits here https://www.boschtools.com/us/en/boschtools-ocs/sds-plus-speedcore-thin-wall-core-bits-22603-c/. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
by|Jun 29, 2023
A: No. RH328VC is Bosch SDS-Plus. You need SDS-Max.
by|May 21, 2019
Q:What Hilti drill would this bit be compatible with ? I have a Hilti TE-C and its to big in diameter.
by|Oct 27, 2018
1 Answer
Answer This Question
A: Thank you for your question. The HC8536 3-1/4 In. x 22 In. SDS-max® Rotary Hammer Core Bit will only work with an SDS-max tool, you can call Hilti and ask about the model numbers. You may also check our line of SDS-max® tools here https://www.boschtools.com/us/en/boschtools-ocs/sds-max-hammers-23518-c/. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
by|Oct 29, 2018
Q:Is this for use in dry, wet or both applications?
by|Oct 20, 2018
3 Answers
Answer This Question
A: I used it without water and it performed great. I don't think water would have improved it any.
by|Mar 31, 2020
A: Dry
by|Jan 9, 2019
A: Thank you for your question. The HC8555 SDS-max Rotary Hammer Core Bit is designed for dry drilling. You can just attach a dust extractor to avoid dust. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
by|Oct 23, 2018
Q:Does this include the mandrel shown in the bottom picture? I purchased this and I only received the bit in the top picture. I did not receive the SDS Max Mandrel as shown.
by|Sep 19, 2018
4 Answers
Answer This Question
A: Also Bosch replied to 2 other similar questions asked here and stated that it does include the mandrel.
by|May 6, 2023
A: No it does not. That is a separate purchase.
by|May 6, 2023
A: Thank you for your question. The HC7507 Rotary Hammer Core Bit is only compose of 2 pc core bit and its centering bit. Mandrel or any extension shaft is sold separately. Here are the extensions we offer https://www.boschtools.com/us/en/boschtools-ocs/sds-max-core-bit-extensions-22582-c/. For further assistance, contact us at 1-877(BOSCH99) or 1-877-267-2499 from Mon-Fri 7A-7P CST.
by|May 6, 2023
A: You can buy core bit with or with out extension that would attach it to your drill. I don't know which you bought. I buy mine with the correct length and type of extension that I want because the core bit can be hard to unscrew from the extension. The pilot bit is replaceable.
by|May 6, 2023
Q:Will this work for with my makita HR2641?
by|Jul 26, 2018
2 Answers
Answer This Question
A: Should fit in any drill set up with the SDS Max Chuck
by|Jan 9, 2019
A: Thank you for your question. The HC8555 Core Bit has an SDS-max shank. If your Makita tool accepts SDS-max shank, then it will work. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
by|May 5, 2023
Q:does it go thru rebar
by|Jul 17, 2018
1 Answer
Answer This Question
A: Thank you for your question. The HC8506 1-3/4 In. x 22 In. SDS-max® Rotary Hammer Core Bit is designed for concrete drilling. With rebar, we recommend to use a rebar cutter. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.