Q:Would this be a perfect product to cover dark walls? How many coats or tubs do I need?
by|Jan 18, 2018
1 Answer
Answer This Question
A: Hello Lizzette87,
Thanks for reaching out to us with your question. Our All-In-One Primer & Sealer is ideal for priming and sealing. Plus it has great hide, so it should help cover your dark colored walls quicker than with paint alone. One to two coats may be needed before topcoating to achieve complete coverage. Each gallon covers 250-400 square feet, depending on the surface's porosity.
Good luck with your project and happy priming! -Joanna
by|May 5, 2023
Q:Can this be used over new veneer plaster? Is it alkali-resistant? The plaster manufacturer recom...
by|Nov 1, 2017
2 Answers
Answer This Question
A: Hi, BlueZero. Our Interior All-in-One Primer & Sealer is probably not the best product for your project, as this is not alkali resistant. Instead, I would recommend using our Interior/Exterior Multi-Surface Primer & Sealer. Here's the link: https://thd.co/2hyZLf0. This primer can be applied on veneer plaster and has Alkali Resistance up to 13 pH. Just ask your local Home Depot associate for help, and they'll be able to point you in the right direction. If you have any other questions, feel free to give us a call at 1(800) 854-0133 extension 2 and we'll help you. Best of luck with your project - Vince
by|May 5, 2023
1 found this answer helpful
A: Yes. this product can be used over plaster surfaces.
by|May 5, 2023
Q:Is this product suitable for new drywall as well as existing painted service with patching.
by|Sep 9, 2016
2 Answers
Answer This Question
A: Hi Joshman,
Thanks for your question. Yes, you can apply this primer to new drywall, as well as existing paint that has been patched. Good luck with your remode! - Sara
by|May 4, 2023
A: Yes, this is suitable for new drywall as well as existing painted service with patching.
by|May 4, 2023
Q:Can this paint be tinted
by|Sep 9, 2016
2 Answers
Answer This Question
A: Hi Malcolm55,
Yes, this primer can be tinted with up to 4 oz. of colorant (per gallon). Happy Painting! - Sara
by|May 4, 2023
A: Yes, it can be tinted.
by|May 4, 2023
Q:Can I use this primer on a tile Kitchen backslash if I use a sealer afterward?
by|Mar 19, 2016
1 Answer
Answer This Question
A: Hi Dallas,
Thank you for your question! Our products are not recommended for use on tile, as it may be too glossy to adhere.
by|May 3, 2023
Q:Is the finish flat, satin or glossy?
by|Feb 7, 2016
2 Answers
Answer This Question
A: Flat
by|May 4, 2023
A: Hi ElsieKane,
Thanks for your question. BEHR PREMIUM PLUS® ALL IN ONE PRIMER & SEALER has a Flat finish, however, It should be used with a topcoat. If you're looking for a paint & primer in one, BEHR MARQUEE®, BEHR PREMIUM PLUS ULTRA® and BEHR PREMIUM PLUS® are great options.
by|May 3, 2023
Q:Good for popcorn ceiling?
by|Jan 18, 2016
2 Answers
Answer This Question
A: This product will prime and seal the ceiling.
by|May 3, 2023
A: Hi Bill,
Thanks for your question. This is a tricky question to answer without seeing the space being mentioned. However, I can provide some suggestions for various scenarios.
1) If the acoustic ceilings have been scrapped and then painted over, then our Behr 75 primer would be a great for priming and sealing the surface.
2) if the acoustic ceilings remain intact, but the surface been painted over. Behr 75 will still work fine as long as the surface is smooth (no large residual areas of "popcorn" granules). From there, we do offer a series of ceiling paints (558 Premium Plus Ceiling Paint, or 5558 Premium Plus Ultra Ceiling Paint).
To speak with a technical specialist about your specific project, you can contact our team at 1-800-854-0133 ext. 2. Good luck with your project!
by|May 3, 2023
Q:Can this be used to cover and seal asbestos tile?
by|Dec 19, 2015
1 Answer
Answer This Question
A: Hello and thanks for your question. No, we would not recommend using our Behr primer and sealer to cover asbestos tile.