Questions and Answers for BEHR PREMIUM 1 gal. #PFC-67 Mossy Gray Low-Lustre Enamel Interior/Exterior Porch and Patio Floor Paint

A:  Hi Gloria. Thanks for writing in with your question. Mossy Gray #PFC-67 is a gray with a slight green undertone to it. Good luck with your project! -Joni

A:  Hi Epa, thank you for writing in. I'm sorry to hear about the slippery residue. You can wash the surface with mild soap and water. If the issue continues, please reach out to us directly for further assistance. Our Customer Care team is happy to help! -Giovanna

A:  Hi ter, Thanks for writing in with your question. Yes, we recommend cleaning, etching, and priming bare concrete with our Concrete Bonding Primer, (No. 880). Good luck with your project! Regards, Giovanna

A:  Yes, this product can be sprayed with an airless sprayer using a 0.015 - 0.021 inch spray tip and a 60 mesh filter.

A:  Hi Josie, Thanks for writing in with your question. The Porch and Patio Floor Paint can be sprayed with an airless sprayer using a .015-.021" spray tip, 60 mesh filter. You can also thin with up to 8 oz. of water per gallon if necessary. Good luck with your project! Regards, Giovanna

A:  Hi Bec, Thanks for your question. This paint is available in 50 custom colors which can be viewed here: https://www.homedepot.com/s/behr%2520porch%2520and%2520patio%2520paint?NCNI-5. This product can also be custom color matched to non-Behr colors at your local Home Depot if you already have a specific color picked out. Best wishes! - Sara

A:  Hi Mit, Thanks for writing in with your question. The Porch and Patio Floor Paint should be applied when the air and surface temperature is between 50-90 degrees Fahrenheit. Have a great day! Regards, Giovanna

A:  Hi Jerry. You can use BEHR PREMIUM Concrete & Masonry Bonding Primer #880 if the furniture has scratched down to the bare concrete. Otherwise just scuff sand with sandpaper to achieve a rough surface should be sufficient. You can paint over the concrete stain as long as the coating is sound and not peeling. Thank you and good luck with your project!