Questions and Answers for BEHR PREMIUM 1 gal. #ST-337 Pinto White Semi-Transparent Waterproofing Exterior Wood Stain and Sealer

A:  Hello, thank you for your question. I'm sorry to hear about the drips on your metal chairs. To remove the dry stain, you can try using a wood finish stripper, sanding off the drips, or checking with your local store for a recommendation on another product you can use. Have a great day! -Giovanna

A:  Hi Alfred, thank you for your question. No, the semi-transparent stain cannot be used over a solid stain or previously coated surface. It should be applied to bare wood. Have a great day! -Giovanna

A:  Hi Kathi - thanks for your question. Yes, all coated surface can become slippery when wet. As it turns out, we do not have any products that can be added to our semi-transparent stains to provide slip-resistance; if you need something with slip-resistance, it's best to use our Anti-Slip Porch & Patio Floor Paint instead. Have a great day! -Christina

A:  Hi Sher - Thanks for your question. It's best to let your wood dry for 24-48 hours before staining to ensure moisture from the wood does not get trapped underneath the coating. Have a great day! -Christina

A:  Hi Mike, thank you for your question. Yes, you can use a mild dish soap to clean your brushes. Good luck with your project! -Giovanna

A:  Hi Elliott, thank you for your question. If the surface is in good condition, you can use the No. 63 cleaner and the apply another coat. However, if the coating is uneven and not sound, then it will be best to remove the stain and start over. Please reach out to us directly if you have any other questions. Have a great day! -Giovanna

A:  Hi Alex, thank you for your question. The Semi-Transparent Wood Stain and Sealer can be top coated with a clear water-based coating, such as polyurethane. Typically, penetrating coatings/sealers require they be applied to uncoated porous surfaces. I recommend reaching out to the manufacturer of the penetrating sealant to ensure its compatibility on top of water-based stains. Have a great day! - Randy

A:  Hi Mike, thanks for the question. You can apply our Solid-Color Waterproofing Stain & Sealer over the existing redwood stain. I'd recommend cleaning the surface first with our All-In-One Wood Cleaner before applying the stain. Our closest color to a dark Oak would probably be Cordovan Brown. I'd also suggest checking out the colors Coffee and Padre Brown. Have a great day! -Ronald