Q:I am repainting trim 10-15 years after previous paint job. I am sure the previous trim paint was a gloss paint like this product. Do I need to prime it again?
by|Dec 18, 2023
2 Answers
Answer This Question
A: Hi Matt, thanks for the question. Yes, it would be recommended to prime over the existing paint before applying the Cabinet. Door & Trim Paint. For the primer, I'd recommend using the Interior/Exterior Multi-surface Primer. Have a great day! -Ronald
by|Dec 19, 2023
A: It's best to lightly sand away the gloss for better adhesion, use a good house wash, let it dry, scrape and sand the areas with pealing paint and then prime first before painting. Priming always produces a better longer lasting paint job.
Mike
by|Jan 29, 2024
1 found this answer helpful
Q:Can this be sprayed with compressed air using an hvlp gun?
by|Dec 13, 2023
1 Answer
Answer This Question
A: Hi Doyle, thanks for the question. We don't recommend using hvlp sprayers for spraying our products, because they tend to be thicker than what the sprayer will accept. Instead, we recommend using an airless sprayer with a .013”–.015” spray tip, Have a great day! -Ronald
by|Mar 1, 2024
Q:How long do you have to wait after spraying this paint before sanding over for smother finish?
by|Dec 13, 2023
1 Answer
Answer This Question
A: Hi David, thank you for your question. We recommend letting our Cabinet, Door & Trim Enamel dry for at least 2 hours before sanding the surface and recoating. Have a great day! -Lina
by|Dec 13, 2023
Q:What's the difference in this white compared to polar
by|Dec 12, 2023
1 Answer
Answer This Question
A: Hi William, thank you for your question. Please feel free to chat with our color experts on our site for color questions. We do not see a color named Polar but do have a few others with the name Polar. Have a great day! -Giovanna
by|Dec 15, 2023
1 found this answer helpful
Q:Why is this not offered in glossy
by|Dec 12, 2023
1 Answer
Answer This Question
A: Hi Bill, thank you for your question. The Cabinet, Door and Trim Paint is available in satin and semi-gloss which is the highest sheen. Good luck with your project! -Giovanna
by|Dec 12, 2023
Q:Which is the thicker paint Behr or Valspar
by|Dec 12, 2023
1 Answer
Answer This Question
A: Hi Bill, thank you for your question. The viscosity of our Cabinet, Door & Trim Enamel is 85-95 KU. As we're only familiar with our products, I recommend reaching out to the manufacturer for more information regarding the consistency of their paint. Have a great day! -Lina
by|Dec 13, 2023
Q:Can this paint be sprayed using an air sprayer?
by|Dec 9, 2023
1 Answer
Answer This Question
A: Hi Alex, thanks for the question. You can spray our Cabinet, Door & Trim Paint with an airless sprayer. I'd recommend using a .013”–.015” sized spray tip, Have a great day! -Ronald
by|Dec 11, 2023
Q:Can this product work on wooden doors
by|Dec 7, 2023
1 Answer
Answer This Question
A: Hi Germ227, thank you for your question. Yes, our Cabinet, Door & Trim Enamel can certainly be used on wooden doors and will work for both the interior and exterior sides of the surface. Have a great day! -Lina
by|Dec 7, 2023
Q:Can this paint be mixed to match a Sherwin Williams paint color?
by|Dec 1, 2023
1 Answer
Answer This Question
A: Hi Stella, thanks for the question. We do have the ability to mix the Cabinet & Trim Paint into some Sherwin-Williams colors. Also, The paint can be custom-matched from a sample. Have a great day! -Ronald
by|Feb 19, 2024
1 found this answer helpful
Q:What paint brush should we use when painting chairs
by|Nov 29, 2023
1 Answer
Answer This Question
A: Hi Linda, thanks for your question. We recommend using a high-quality nylon/polyester brush with our Cabinet, Door & Trim paint. Have a great day! -Christina