Questions and Answers for BEHR PREMIUM 1 gal. #PFC-48 Aqua Marble Solid Color Flat Interior/Exterior Concrete Stain

A:  Hi LeVelleG, thank you for your question. When using the Solid Color Concrete Stain, it's best to apply using long, even strokes in the direction of the brushed finish. Have a great day! - Randy

A:  Hi Neal, thank you for your question. Although our Solid Color Concrete Stain doesn't require a sealer, our Wet-Look Sealer No. 985 and Low-Lustre Sealer No. 986 can be applied on top for added protection and more sheen. Have a great day! - Randy

A:  Hi there, thanks for the question. If needed, you can thin the Solid-Color Concrete stain with up to 8 ounces of water per gallon. Have a great day! -Ronald

A:  Hi RaeAnne, thanks for the question. Yes, I would recommend priming the exterior brick first before applying the stain. For vertical surfaces such as the exterior of the home, I'd recommend using out Multi-Surface Primer & Sealer # 436 and if the happens to be horizontal surfaces that will be walked on, I'd recommend our Concrete & Masonry Bonding Primer #880. Have a great day! -Ronald

A:  Hi there, thanks for the question. We don't have a non-slip sealer to apply over the Solid-Color Concrete Stain that I can recommend, Our Low-Lustre and Wet-Look Sealers will add a sheen to the floor, which may make it slippery, especially if it gets wet. We do have our Non-Skid Floor Finish Additive that can be added to the final coat of stain that will provide slip resistance. Please reach out to us directly if you have more questions about your project; our customer care team is happy to help you! -Ronald

A:  Hi Tracy, thanks for the question. You can apply the Solid-Color Concrete Stain over the existing epoxy paint. If the paint is flossy, I'd recommend scuff-sanding to help with the adhesion of the stain, I'd also recommend priming the surface with our Concrete & Masonry Bonding Primer. Have a great day!

A:  Hi Mike, thanks for the question. The color Blue Tundra would look good on your porch steps. Have a great day! -Ronald

A:  Hi there, thanks for the question. For 360 square feet, it would take approximately 1.75 - 2 gallons of the Concrete Stain to apply 2 coats. Have a great day! -Ronald

A:  Hi Christian, thank you for your question. Please see your local store for a recommendation on a paintable crack repair product to use for your project. Have a great day! -Giovanna

A:  Hi Racheal, thank you for your question. Yes, our Solid Color Concrete Stain can be used to stain your brick surface. Have a great day! -Lina