Questions and Answers for BEHR PREMIUM 1 gal. #MS-32 Glacier White Elastomeric Masonry, Stucco and Brick Exterior Paint

A:  Hi Jimmy, thank you for your question. The Elastomeric Masonry, Stucco & Brick Paint can be applied to cinder block walls. Have a great day! - Randy

A:  Hi Greg, thank you for your question. As it turns out, the Masonry, Stucco and Brick Paint is not designed for wood surfaces or applied to areas below grade or in direct contact with dirt or soil. This can cause the coating to break down and result in performance issues. Have a great day! - Randy

A:  Hi Remodel, thank you for your question. As it turns out, the Elastomeric isn't recommended on horizontal surfaces. Have a great day! - Randy

A:  Hi Robert, thank you for your question. As it turns out, the Elastomeric Paint isn't recommended on concrete floors. Instead, it's best to use one of our concrete floor coatings. Have a great day! - Randy

A:  Hi John, thank you for your question. Yes, our Elastomeric Masonry, Stucco, & Brick Paint can be tinted, and even custom color matched. Have a great day! -Lina

A:  Hi Isc18, thank you for your question. The dried and cured surface of the Elastomeric, Masonry, Stucco and Brick can be cleaned using a power washer at the lowest setting. Have a great day! - Randy

A:  Hi Frank, thank you for your question. To prepare your surface for our Elastomeric Masonry, Stucco & Brick Paint, I recommend making sure that the surface is clean and in good sound condition. If you have any cracks wider than 1/16" (1.5 mm), that will need to be repaired before priming the uncoated, patched, or chalky areas. Please feel free to reach out to us directly if you have any other questions. -Lina

A:  Hi TracyC, thank you for your question. Our Elastomeric Masonry, Stucco, & Brick Paint can be applied over cinderblock that does not have vinyl siding applied over it. However, if you're trying to paint vinyl that has been installed over cinderblock, we do not recommend using our Elastomeric Paint as it's not recommended for vinyl surfaces. Please feel free to reach out to us directly if you have any other questions. -Lina

A:  Hi Lucy, thanks for the question. Our Elastomeric Paint isn't recommeded to be used on the interior of the home. If this is an outdoor fireplace, you can apply the Elastomeric Paint to the exterior brick as long as the surface temperature doesn't exceed 140 degrees. Temperatures higher than that can cause the paint to fail prematurely. Have a great day! -Ronald

A:  Hi Oscada, thank you for your question. We do not recommend thinning the Elastomeric Paint. It can be sprayed with an airless sprayer at package consistency using a .025-.029" tip at a minimum of 2,500 PSI. Have a great day! -Giovanna