Questions and Answers for BEHR MARQUEE 1 gal. #PPU15-11 Great Falls Satin Enamel Exterior Paint & Primer

A:  Hi Sarah, thank you for your question. We recommend using the product when air and surface temperatures are between 35-90 degrees Fahrenheit and will remain that way for at least 4 hours after applying. Have a great day! -Giovanna

A:  Hi Bill, thank you for your question. As it turns out, we do not recommend our Marquee Paint for roofs. Instead, I advise using our Multi-Surface Roof Paint, which can be applied to metal and will withstand high roof temperatures. Best of luck with your project! -Lina

A:  Hi Patti, thank you for your question. Yes, our Marquee Exterior Paint can be used on previously painted masonry surfaces in good condition. The surface should be sound, clean, and dry. Good luck with your project! -Giovanna

A:  Hi Teri, thank you for your question. The Marquee Exterior Paint can be recoated after 2 hours. Have a great day! -Giovanna

A:  Hi Fuller, thank you for your question. Yes, our Marquee Exterior Paint can be used on aluminum siding. The surface should be sound, clean, dry, and scuff sanded or etched to promote adhesion if the finish is glossy. Good luck with your project! -Giovanna

A:  Hello, thank you for your question. Yes, our Marquee Exterior Paint can be used on metal doors. The surface should be sound, clean, dry and scuff sanded or etched to promote adhesion. Good luck with your project! -Giovanna

A:  Hi there, thanks for the question. If the paint has already been applied and the temperature rises above 90 there shouldn't be an issue. If you're still applying the paint and the temperature is above 90, it would cause the paint to dry faster and make it harder to work with. If you're applying the paint in extreme heat and the surface is very hot, it could cause the paint to bubble. Good luck with your project! -Ronald

A:  Hi Ed, thanks for the question. As long as the second coat is applied before the paint fully cures, you don't need to sand between coats. Typically, it takes our Marquee Paint about 4 weeks to fully cure. Have a great day! -Ronald

A:  Hi Dani, thank you for your question. Although we do not have the color details, I can suggest a few similar colors. Check out Oak Creek HDC-AC-07, Timber Brown N140-7, and Sweet Molasses PPU5-20. Have a great day! -Giovanna

A:  Hi Joan, thanks for the question. Yes, our Marquee Exterior Paint would be a great choice for brick. It has outstanding fade & dirt resistance, Have a great day! -Ronald