Questions and Answers for BEHR PREMIUM 1 gal. #AE-25 Colony White Urethane Alkyd Semi-Gloss Enamel Interior/Exterior Paint

A:  Hi Elle, thank you for your question. Each gallon of the Urethane Alkyd Paint covers between 350-550 sq. ft. The number of cabinets and drawers you can do will depend on the size and number of coats applied. Good luck with your project! -Giovanna

A:  Hi Limewash, thanks for your question. While our primers can be used under limewash, our Urethane Alkyd Enamel Paint is not a primer. If you need to prime before applying your limewash, I recommend reaching out to the manufacturer to see what kind of primer they recommend using. Good luck with your project! -Christina

A:  Hello, thank you for your question. Yes, the Urethane Alkyd Paint can be used on outdoor furniture exposed to the elements. Have a great day! -Giovanna

A:  Hi Milton, thank you for your question. We do not recommend using our products on countertops. Our coatings are not FDA-approved for direct contact with food. Additionally, water exposure, food stains, cleaning, hot pans, etc., will lead to reduced durability of the paint and an unsatisfactory surface. Good luck with your project. - Alex

A:  Hi Akascooter99, thank you for your question. Extended dry time may be needed to allow the deeper layers of paint to dry thoroughly after applying a second coat of Urethane Alkyd Paint before the recommended recoat time. If any paint had lifted when applying the second coat, the surface should be allowed to dry before sanding the affected area smooth, cleaning and touching up. Please reach out to us directly if you need further assistance. Our customer care team is happy to help you! - Randy

A:  Hi there, thank you for your question. You can use either a soft or firm-bristle brush. A soft bristle brush will help achieve a smoother finish, while a firm bristle brush will help with fine details on the surface. Have a great day! -Lina

A:  Hi CHEENA, thank you for your question. When scuff sanding, we recommend using 220-grit sandpaper. Drywall should be sanded smooth, dust removed, and drywall compound thoroughly dry before painting. We recommend priming drywall using the Kitchen, Bath and Trim Primer and two coats of Urethane Alkyd. Have a great day! - Randy

A:  Hi, BUZZ; thanks for the question. It isn't recommended to thin the Urethane Alkyd Enamel. For spraying, I'd recommend using an airless sprayer with a .013" -.017" sized tip. Have a great day! -Ronald

A:  Hi Jerry, thank you for your question. For scuff sanding, we recommend using 220-grit sandpaper for interior surfaces and 150-grit for exterior. Have a great day! - Randy

A:  Hi Jerry, thank you for your question. The Bonding Primer #432 can be applied to vinyl and previously painted surfaces. Have a great day! - Randy