A: mike - The valve assembly part number M962778-0020A, currently the only item available as a repair part. You can call American Standard directly for information.
by|May 5, 2023
Q:What is the lead content of this valve and where is it made?
by|Jul 26, 2017
1 Answer
Answer This Question
A: This does not meet low lead requirements- so it would contain more than .5
by|May 4, 2023
Q:I had my plumber install this in my kitchen and now after 18 months the cold water won't shut off. It's like the valve is stuck open. Suggestions?
by|Jan 27, 2017
1 Answer
Answer This Question
A: Please contact customer service at 1-800-442-1902 for some trouble shooting.
by|Feb 8, 2018
Q:What other connections, parts do I need to install this in our home?
by|Aug 9, 2016
2 Answers
Answer This Question
A: On the back there are 3 threaded holes, one for hot in, one for cold in, and one mixed going out at the top. I bought 3 brass pipes to screw in to them (with Teflon tape), so I could use a standard supply lines to connect to the water supply. Here are the pipes I used: https://www.homedepot.com/p/Everbilt-1-2-in-MIP-x-2-1-2-in-Lead-Free-Brass-Pipe-Nipple-Fitting-802389/207176518 Here are the supply lines I used: https://www.homedepot.com/p/The-Plumber-s-Choice-1-2-in-IPS-x-3-8-in-Compression-x-30-in-Braided-Faucet-Supply-Connector-2-Pack-NL-27130-2/310336651
by|May 8, 2020
2 found this answer helpful
A: You don't need any other parts. You just hook this up to the supply lines.
by|May 3, 2023
1 found this answer helpful
Q:I have a 7680.210 and I am looking for a parts replacement kit with washers and the Spring?
by|May 11, 2016
1 Answer
Answer This Question
A: I am attaching a copy of the repair parts diagram. Please contact our customer care line at 800-442-1902 and one of our reps will be happy to assist you with parts.
by|Mar 23, 2023
Q:Its possible to calibrate water temperaure? For example on winter hottest water. It that possible?
by|Jan 24, 2016
3 Answers
Answer This Question
A: The product has a set temperature.
by|May 3, 2023
1 found this answer helpful
A: This has a set temperature, theres no way to adjust the temperature setting.
by|May 3, 2023
1 found this answer helpful
A: The pedals can be pressed separately to get only hot, or only cold, or together at the same time to mix hot and cold. With practice I think you could do this with one foot. There is nothing automatic about the valve control, it is completely operated by your feet.