Q:what is the deepest soaking depth you have in an alcove 60 by 30. prefer Americast but depth is important. thanks
by|Jan 18, 2022
2 Answers
Answer This Question
A: sally Milne,
The deepest in a 60x30 is going to be the Town Square S 2545102/2545202 with a water depth to overflow of 12-3/4" The Princeton Americast 2390/2391 has 9-1/2". If you prefer the Princeton they can use the deep soak drain model 1640305.xxx for an extra 2" of soaking depth for a total of 11-1/2". They can use that drain on the Town Square too.
The Town Square is an acrylic tub with fiberglass reinforcement and the Princeton is an Americast.
Sincerely, your American Standard Consumer Connection Team
by|Jan 19, 2022
A: sally Milne,
The deepest in a 60x30 is going to be the Town Square S 2545102/2545202 with a water depth to overflow of 12-3/4" The Princeton Americast 2390/2391 has 9-1/2". If they prefer the Princeton you can use the deep soak drain model 1640305.xxx for an extra 2" of soaking depth for a total of 11-1/2". You can use that drain on the Town Square too.
The Town Square is an acrylic tub with fiberglass reinforcement.
Sincerely, your American Standard Consumer Connection Team
by|Jan 19, 2022
Q:Can you use an deep soak drain with this tub to increase the soaking depth? If so, which model? Thanks
by|May 27, 2021
1 Answer
Answer This Question
A: Thanks for the question, yes, you can use the American Standard 1640 deep soak drain on this tub. Your American Standard Consumer Connection Team.
by|May 27, 2021
Q:How long does the water stay warm compared to cast iron?
by|Nov 13, 2020
1 Answer
Answer This Question
A: ASH1,
Americast acts as an insulator and will retain heat in water longer than cast iron and enamel steel. Cast iron is a conductor of heat, and therefore draws heat out of the water. With Americast the fixture is warm to the touch and bath water remains warmer longer allowing for warm relaxing baths.
Sincerely, your American Standard Consumer Connection Team
by|Nov 16, 2020
Q:I’m installing Princeton 171/2 inch Americast tub the floor doesn’t touch tub by 4 inches I installed stringer do I need to install struccolite or plaster under it or the tub stays suspended in air
by|Dec 5, 2018
1 Answer
Answer This Question
A: No additional support is required.
by|Aug 13, 2020
Q:What is the difference between the Princeton tub models 2392.202 and 2393.202?
by|Sep 1, 2016
1 Answer
Answer This Question
A: The 2392.202 tub has a right hand drain and the 2392.202 has a left hand drain.
by|Sep 16, 2019
Q:Is there a tub enclosure for this tub?
by|Mar 21, 2016
1 Answer
Answer This Question
A: Dear Valued Home Depot Customer,
We reached out to MFG for more information and below is their response.
“ Yes, any of our wall surround that has the same 60X30 dimensions as the tub will fit. "
by|May 3, 2023
1 found this answer helpful
Q:Looking at 2393.202, can you clarify the drawing? I understand 435mm to be rough floor to top of support stringer and 64mm the distance from the top of the tub to the centreline of the overflow drain. What is the dimension for 23mm, 349mm and 445mm?
by|Jan 31, 2016
1 Answer
Answer This Question
A: I forwarded this information to your email address.
by|Mar 23, 2023
Q:Do you have an image of the tub cover that comes with model 2392.202TC?
by|Nov 25, 2015
1 Answer
Answer This Question
A: All the images we have is what is on the website as well as the spec sheet.