Q:I have a one piece toilet that I think is from the middle 1960's there are very few markings that I can see. Maybe you can tell where to look for the numbers. On the back wall of the tank there is a marking M65 on the lid there is a marking F2003.
by|Jul 26, 2021
1 Answer
Answer This Question
A: AdaeJohn,
It sounds like the 2003 is the model number for the tank. If you are looking for parts we will no longer carry any of them due to the age of the toilet however you can try www.lockeplumbing.com as they carry our older parts.
Sincerely, your American Standard Consumer Connection Team
by|Jul 27, 2021
Q:My toilet has 224 1986 imprinted on the back of the inside of the tank. I need a new toilet flapper that looks like the one in the picture (Part Number: 068470-0070A). Will this part fit my toilet? Thanks!
by|Jul 23, 2021
1 Answer
Answer This Question
A: Anonymous,
We would need the model number of your toilet tank please. It will be inside the tank along the back wall and will be a four digit number beginning with a 4. . Please contact us directly through the American Standard website “Contact Us” located at the bottom of our home page. We will be happy to assist you in getting your issue resolved. Sincerely, your American Standard Consumer Connection Team
by|Jul 26, 2021
Q:I’m searching for a answer my toilet mysteriously runs for a minute. This does not happen continuously it’s very random. The model number is 2910 it’s a one piece unit.
by|Jun 29, 2021
1 Answer
Answer This Question
A: Aj37,
Please contact us directly through the American Standard website “Contact Us” located at the bottom of our home page. The 2910 is not a valid model number but one of our reps will be able to help you. Sincerely, your American Standard Consumer Connection Team
by|Jun 30, 2021
Q:My 55 year old American Standard tank has 4049 impressed on the inside. Will this actuator and flapper fit? It looks similar to the old one.
by|Apr 19, 2021
1 Answer
Answer This Question
A: Steve Pa,
I am very sorry but we no longer carry parts for this toilet due to its age. Please contact www.lockeplumbing.com and they will be able to help you with parts for this tank.
Sincerely, your American Standard Consumer Connection Team
by|Apr 21, 2021
Q:the one piece tank wall is pretty worn/blurred...I think it may be either 20006 or possibly 30006...I can't really tell....but I need the proper actuating unit for this tank....can you advise....I did buy the 068470-0070A and it failed to fit
by|Feb 28, 2021
1 Answer
Answer This Question
A: Mike,
Could it possibly be a 2006? If that is possible then you would want to order part number 047250-0070A.
Sincerely, your American Standard Consumer Connection Team
by|Mar 1, 2021
Q:According to my spec sheet, I need part "397700-0000A" which is a flush actuating unit for my cadet 3 (before 8/1997). Where can I get this or an alternative? I've looked everywhere.
by|Feb 24, 2021
1 Answer
Answer This Question
A: stevieJ,
. Please contact us directly through the American Standard website “Contact Us” located at the bottom of our home page. 397700-0000A is not a valid part number and one of our reps will be able to assist you. We will need to know the model number of the toilet tank. It will be inside the tank along the back wall and will be a four digit number beginning with a 4.
Sincerely, your American Standard Consumer Connection Team
by|Jun 28, 2021
Q:WRONG ANSWER. Amer stand Cadet iii (3). TANK is AF4650.100. I need a new Flush Valve Actuating Unit (NOT FLAPPER) similar to the one above (068470-0070A). There seems to be #4, #5, #6 versions. Answer provided was wrong (for a flapper).
by|Feb 24, 2021
1 Answer
Answer This Question
A: StevieJ,
Please go to Guillens.com and if you look at the repair parts diagram the flush valve is listed as part number 047394-0070A.
Sincerely, your American Standard Consumer Connection Team
by|Feb 27, 2021
Q:I have an American Standard Cadet iii (3). Original invoice from 1996 says the TANK is AF4650.100. I need a new Flush Valve Actuating Unit similar to the one above. There seems to be #4, #5, #6 versions. Can you tell me the right part for my toilet?
by|Feb 24, 2021
1 Answer
Answer This Question
A: StevieJ,
You will want to order part number 047394. You may want to try Guillens.com or www.lockeplumbing.com.
Sincerely, your American Standard Consumer Connection Team
by|Feb 24, 2021
Q:Hi, what is the correct flush valve for the AS one piece WC model 4664. thanks!
by|Feb 19, 2021
1 Answer
Answer This Question
A: Kenny69,
The 4664 is not a valid model number. . Please contact us directly through the American Standard website “Contact Us” located at the bottom of our home page and one of our reps will be able to assist you.
Sincerely, your American Standard Consumer Connection Team
by|Feb 22, 2021
Q:THE TOILET I HAVE IS MARKED 186 2006-I. WHAT IS THE CORRECT PART # FOR A REPLACEMENT FLAPPER
by|Feb 14, 2021
1 Answer
Answer This Question
A: Hello, Thank you for reaching out to the American Standard Consumer Connection Team. the correct part number for the 2006 one-piece toilet is the 047250-0070A.If there is anything we can assist you in the future, please feel free to contact us at 1-855-815-0004 Monday – Friday, 8AM – 7PM EST or Saturday 10AM – 4PM and an American Standard Consumer Connection Advisor will be happy to assist you.