Questions and Answers for Dual Mount Granite 33 in. 4-Hole Offset Double Bowl Kitchen Sink in White

A:  This sink comes with only the mounting hardware (clips and devices for either drop in or under mount applications). The disposal collar and basket strainer drain are sold separately and can be obtained from most hardware and plumbing stores. The collar and drain are not product specific so you can get most any brand. If your unsure measure the sink hole opening and talk with a local hardware or plumbing store professional about which ones to purchase. I spent a little extra on higher end drain (brass couplings etc.) and bought a standard "insinkerator" food disposal collar to match my existing garbage disposal. Quick 15 minute trip to hardware/plumbing store and your all set.

A:  No just the sink. This allowed you to customize the sink with the products you want. There is a lot to choose from all in different price ranges. Both sides have a 3 1/2" opening. I believe this is standard . I put a 31/2" basket n strainer on left. I put a insinkeraitor garbage disposal on right it was made to fit a standard 31/2" opening. Hope this helps.

A:  Hi Jazzinay, This sink does not come with any accessories. The drain hole for the garbage disposal is 3.5 inches. For additional questions please contact 1-866-854-2516. Thanks

A:  It does not come with accessories. The picture shows a drain/basket and disposal cap/collar in stainless steel, but you will need to buy those separately. Home Depot carries a set for $48.

A:  Hi just me, The left bowl is 10 inches and the right bowl is 8 inches. For additional questions you can call 1-866-854-2516. Thanks

A:  the large bowl is 10" the right bowl is 9"

A:  No. Left one is 10" and right one is 8"

A:  The left bowl is 10", the right bowl is about 8.5".

A:  No. Left one is 10" Right one is 8"

A:  Rose, The bowls are 22 inches in depth. For additional questions please call 866-854-2516.

A:  The larger bowl on the left is 10" and the smaller bowl on the right is 9".

A:  Hi Carl, This would be a question that would best be answered by the manufacturer. They can be reached at 1-866-854-2516. Thanks

A:  I'm just an entry level DIY'er. But the sink dropped in nicely for me and the weight was pretty much keeping it in place without any adhesive. I used the drop in clamps to secure it but I don't see why gluing it under the lip would not work the same for holding it in place. The key would be the size of your opening if it s too big to support a clean drop in (edges of sink resting on counter top) I would not recommend installing it that way.

A:  Homedepot.com . But first call Homedepot and ask them to look it up and give you the on line product number. Then all you have to do is type that number in the search bar and it will come up as the only item. No searching. Best of luck.

A:  Red is not available online. If there was one on display in the store, it would most likely be available via special order.

A:  Yes it can. It is dual mount.

A:  It can be undermounted, but I'm not sure about installing tile over it. If I were installing tile, I'd go for drop in. If you do decide to undermount, use a professional plumber.

A:  Yes, it can be installed under mount. I apologize I'm not sure what you mean by tiled in. If you'd like to speak directly with the technical department at the manufacturer, they can answer any further questions for you. You can reach them at 866-854-2516 with the sink model number: AR20MC. Thank you for reaching out!

A:  Hi, Chris. No, the sink has 4 pre-punched hole spaces in the sink and you select how many of them/which ones you want to use, punch them out according to the installation directions here (http://www.homedepot.com/catalog/pdfImages/eb/eb591cda-0c5d-493c-9c65-56a2b99f7a1d.pdf) and use to your preference. Thanks for reaching out!

A:  This has one hole, and more if you need. simply punch them out. I have mine installed using one hole. you will love this sink!

A:  Mine came, even thought I specifically requested additional holes cut out completely, with only one hole cut out and the other 3 are predrilled about a quarter of the way only, you have to do it yourself for the others or have it done professionally , which for me cost about 10 dollars a hole at a granite shop.

A:  Yes it comes with only one hole but other holes are marked on the back side and can be cut with a diamond 13/8 inch hole saw.

A:  WHITE VINEGAR!,and clean daily or weekly, don't allow build up. will still come off, but much harder to do if you let it go to long.

A:  Hi, Dee. I know that for general cleaning, the manufacturer recommends using Lime Away, Soft Scrub, or Barkeepers Friend with a soft cleaning pad and that Pledge can be used to bring back luster. As to how best to remove the white streaks, I think the MFTR team would be best to advise on that, as well. Please give them a call at 866-854-2516 so they can assist. :) Thank you for reaching out!

A:  This item is currently available in the Sahara Beige color.

A:  Apologies, but we do not manufacture a grid for the right side of the sink, only the left.