A: Yes,
CONCRETE SURFACES
• Remove all dirt, efflorescence, grease, oil, waxes, silicone
products, and other foreign material that would interfere
with the adhesion of Deck-A-New. Glossy painted surfaces
must be de-glossed to allow for better adhesion. Clean
the de-glossing dust from the surface with a damp cloth.
Patch and repair concrete surfaces with a high-quality
patch mix, which is labeled paintable.
• Uncoated smooth, steel-toweled concrete floors (floors
with no porosity) must be totally cured, and cleaned with
Anvil Clean & Etch #1450. To further ensure maximum
adhesion and durability, concrete should be primed with
Anvil Bonding Primer AquaSeal #235
by|May 20, 2019
Q:How does this look after rain, and dust are blown on the deck. My last paint seemed to hold onto the dust, it couldn't just be washed off with a garden hose.
by|Jul 13, 2018
1 Answer
Answer This Question
A: The product should not hold water or dust if applied and maintained properly.
by|May 5, 2023
Q:I'm assuming the recommended Primer/Sealer would be applied "Prior" to deck stain. Is this correct?
by|May 15, 2018
2 Answers
Answer This Question
A: It's recommended that no primer is applied prior to application. Make sure the boards are clean, not with power washing but a floor sander works best.
by|May 5, 2023
A: Yes, be sure to clean the surface and allow to dry and apply one coat of primer.
good luck with your project.,
Tech
by|May 5, 2023
1 found this answer helpful
Q:What temp is required for application?
by|Aug 19, 2017
0 Answer
Answer This Question
Q:Do I have to use a primer, I wasn't planning on it.
by|Jul 10, 2017
1 Answer
Answer This Question
A: I would recommend the Anvil Aqua Seal 235 Bonding primer Sealer it is very inexpensive but very effective. 1 coat would do it.
thank you for choosing Anvil Products.
Sincerely,
Tech
by|Apr 2, 2019
2 found this answer helpful
Q:Do you use the Aqua seal 235 primer sealer straight from the jug for sealing the painted floorboards? The info on this product says it can be mixed with a primer, or tinted. Any thoughts on the best way ?
by|Jul 4, 2017
1 Answer
Answer This Question
A: Aqua Seal 235 works great as a primer on your deck boards straight out of the bottle. Clean your surface first and then let it completely dry and apply with a roller and then allow it to dry for 2 hours and then you can top coat with Deck-A-New.
Tech.
by|May 4, 2023
1 found this answer helpful
Q:Can this be used on a hardwood tongue and groove porch floor? My floor has been painted with oil paint. What prep would I need??/
by|Jul 2, 2017
1 Answer
Answer This Question
A: Yes it can. take TSP that you can buy from any home center and use it to clean the surface with a pressure washer. allow to dry for at least two days. then apply one coat Aqua Seal 235 Primer/Sealer and allow to dry for 4 hours. then apply 2 Coats of Deck-A-New Cedar.
Please let us know how your project turns out.
Thanks,
Tech Dept.
by|May 4, 2023
Q:Has anyone used this product in recent years with good results still? As in, no peeling? Has it h...
by|Jun 3, 2017
1 Answer
Answer This Question
A: This product has become the premier product for wood decks resurfacing. I have used it on my dock and is still preforming after five years.
Tim