Questions and Answers for Glasliner 4 ft. x 8 ft. White .090 FRP Wall Board

A:  Hello Fred, The finish is designed to be a non‐adherable surface. If painting is necessary, a high-quality epoxy or acrylic‐based paint is suggested. Thanks, -Stabilit America

A:  Yes I am putting on a whole building as siding. It’s 1100 sq feet and it works. I had my boards in the Sun and weather for over a year before using it and it’s still bright white! Don’t be afraid just because they say “interior”

A:  Hello Charlie, No, all FRP products sold through Home Depot are for interior use only. The panels do not have a UV treating and will yellow and crack if exposed to sunlight for long periods of time. -Stabilit America

A:  Hello Wall, please contact your local Home Depot store or customer service to clear items in your cart. Thank you, Stabilit America

A:  de[ends , if you want for a shower or any wet place , I say not ,

A:  Hello Fred, Yes, You can use nylon rivets (sold in store next to the panels) for installing the panels. Be sure to predrill the holes for the rivets. The recommended way to install is to use FRP adhesive. Thank you, -Stabilit America

A:  Hello Kris, The finish is designed to be a non‐adherable surface. If painting is necessary, a high-quality epoxy or acrylic‐based paint is suggested. Thanks, -Stabilit America

A:  Yes , but you need a special primer

A:  Hello Wonder, To keep it as clean as possible, we recommend washing the panels with a light detergent. The panels may also be cleaned with steam, high pressure sprayers, or soap and water. We strongly advise against using abrasive cleaners on panels to avoid scratching or scraping the surface. Hope this helps! -Stabilit America

A:  home depot has something like goo off

A:  yes , is water proof , easy to clean , just no close too heat

A:  Hello Robert, FRP panels would be great to use on the inside of a food truck. But do not put them directly behind a stove or any other area that would be exposed to high temperatures. The panels will warp and burn. Thank you, -Stabilit America

A:  yes , but you need seal all corner with silicon

A:  Hello Darryl, Yes, these panels can be used for shower walls. As long as the joints are sealed with a silicone caulk then you should be good to go. Thanks, -Stabilit America