Q:does the store have roof flashing for 8" stove pipes
by|May 26, 2018
1 Answer
Answer This Question
A: The only Flashing Oatey offers in 8" will be the Master Flash (#14055), however, this Flashing is only designed for metal roofs.
by|May 5, 2023
Q:Why don't you have conduit roof flashings for a 2" through the roof heavy wall conduit mast? All you have is plumbing flashings.
by|Dec 4, 2015
5 Answers
Answer This Question
A: Thank you for your recent inquiry with The Home Depot, Tom. We do carry 2 in. Conduit Flashing Internet # 205430375. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
by|May 3, 2023
2 found this answer helpful
A: Haha, Tom is correct. That thing looks like something I made in 9th grade metal shop.
Home Depot does have an item that works, you just have to cut the rubber boot to fit the 2.36 outer diameter" mast.
As long as the mast is over the eaves I don't see a problem. Just put some good mastic around it for good measure.
by|May 3, 2023
A: This is a reply to THD Support's answer to my original question. I looked up item #205430375 and it IS NOT a conduit roof flashing. Home Depot is absolutely NO REPLACEMENT for a good electrical supply house!
by|May 3, 2023
1 found this answer helpful
A: If you have any further questions, please reach out to us at technical@oatey.com.
by|Apr 5, 2024
A: Look in electrical. Most plumbing inspectors up north here want a minimum 3" vent.
by|May 5, 2023
Q:But WHICH sizes of pipe is this jack for?
by|Jul 5, 2015
6 Answers
Answer This Question
A: When I zoom in on the picture, it looks like it's for a 3" to 4'' vent pipe.
by|May 3, 2023
3 found this answer helpful
A: this IS the 3-4" boot. I ran the sku in the store computer system at register.
- store employee
by|Apr 3, 2019
5 found this answer helpful
A: This is a flashing and it fits 3" or 4" stacks.
by|May 5, 2023
A: 3" and 4" pipe. it has a scored ring in the rubber to remove a ring to convert it from 3" to 4".
by|May 5, 2023
A: If you have any further questions, please reach out to us at technical@oatey.com.
by|Apr 5, 2024
A: The collar comes with the 3 inch hole to fit that size roof pipe. It can be adjusted to a 4 inch hole with a pair of pliers. Instructions on the collar.