Q:I'm putting in subfloor in mobile home. How much weight will it hold?
by|Oct 30, 2017
3 Answers
Answer This Question
A: that would all determine on the thickness you chose for the subfloor
by|May 5, 2023
A: The 3/4 or 23/32 is a much better choice for a sub floor as 1/2 inch may bow.
by|Dec 28, 2018
1 found this answer helpful
A: It is not appropriate for a subfloor.
by|Jun 23, 2019
Q:DO YOU HAVE A BULK PRICE ON THIS ITEM
by|Oct 13, 2017
3 Answers
Answer This Question
A: No I do not
by|May 5, 2023
A: Hi, yes you need to go to your local home depot, go to the Pro's desk and ask about how much of a bulk purchase discount you can get on this item.
As this will have to come from your local store.
by|May 5, 2023
A: No
by|May 5, 2023
Q:Do you have any AC grade 3/8 plywood
by|Oct 6, 2017
2 Answers
Answer This Question
A: Yes
by|May 5, 2023
A: Hi, you would have to contact your local home depot to see what they carry of that in stock.
Or if not if they may be able to special order it, as not all products are available at all stores.
and the selection of what they carry is also determined by location and availability.
So it is what your local home depot's distributor carries that determines what is available.
Price is also determined by location and availability.
But also by manufacturer, which will vary from store to store.
by|Feb 21, 2019
Q:What does BC Sanded
by|Aug 18, 2017
2 Answers
Answer This Question
A: It will have a B side and a C side the B side will be a nicer finish then the C side.
by|May 4, 2023
A: It means that one side is grade B and the other is C. It's supposed to have B side defects filled and the board sanded smooth. None of the produce I got was even close to that. And, the middle layer is grade C or worse, so if you need rigidity or strength it's not there. It's okay as a facing, where appearance isn't important, but not where structural strength is needed.
If you need it for underlayment, look at the underlayment sheets, instead. They're far more rigid and perfectly smooth.
by|Oct 6, 2020
3 found this answer helpful
Q:Are all pine knots filled (B grade)?
by|Aug 13, 2017
3 Answers
Answer This Question
A: Yes and No as it vary from 1 sheet to the next.
by|May 4, 2023
A: Yes
by|May 5, 2023
A: Yes they are filed and smooth
by|May 5, 2023
Q:What is the actual thickness? 11/32 or 3/8 or 0.47in in the description?
by|Jul 25, 2017
3 Answers
Answer This Question
A: Actual thickness is 11/32". (The 3/8" is the size-category, or nominal size. The .47" is simply an error in the description.)
by|Mar 29, 2021
3 found this answer helpful
A: Hi, you would have to contact your local home depot to see what they carry of that in stock.
Or if not if they may be able to special order it, as not all products are available at all stores.
and the selection of what they carry is also determined by location and availability.
So it is what your local home depot's distributor carries that determines what is available.
Price is also determined by location and availability.
by|Jun 19, 2020
A: The thickness is .47 inches.
by|Apr 15, 2020
1 found this answer helpful
Q:Need to build a Deer Stand out of plywood! What would you recommend for walls? 1/4 inch
by|Jun 19, 2017
4 Answers
Answer This Question
A: The entire stand should at least be made of wood that is at least this thick.
by|May 4, 2023
A: I personally would recommend 11/32 or 3/8 for more stability in your design
by|May 4, 2023
A: 1/4" should be good enough
by|May 5, 2023
A: 2x4 studs and some 3 inch decking screws should do the trick. I suggest getting the screws that use a T25 bit and forget Phillips head screws even exist. I hope this helps.
by|Mar 11, 2020
1 found this answer helpful
Q:COST
by|Jan 30, 2017
3 Answers
Answer This Question
A: Hi, you would have to contact your local home depot to see what they carry of that in stock.
Or if not if they may be able to special order it, as not all products are available at all stores.
and the selection of what they carry is also determined by location and availability.
So it is what your local home depot's distributor carries that determines what is available.
Price is also determined by location and availability.
by|May 4, 2023
A: I paid $21.
by|May 5, 2023
A: Thank you for your recent inquiry with The Home Depot, June. This 11/32 in. or 3/8 in. x 4 ft. x 8 ft. BC Sanded Pine Plywood is only carried in select Home Depot stores and not online. Please contact your local Home Depot Store for stock availability and pricing. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
by|Jan 31, 2017
Q:Is this exterior grade?????
by|Jan 1, 2017
3 Answers
Answer This Question
A: Only if used under siding.
by|May 4, 2023
A: If you prime it and paint it, then it's suitable as overhang soffit, porch ceiling, garage paneling, etc. But it's not suited for prolonged, direct exposure to the elements -- even if primed and painted. It's not suitable as structural sheathing, either.
by|Oct 11, 2019
2 found this answer helpful
A: No
by|May 4, 2023
1 found this answer helpful
Q:how much does it weigh
by|Nov 3, 2016
3 Answers
Answer This Question
A: Plywood weight varies a little by species, moisture content, and glue content, but 11/32" (3/8") plywood will weigh about 30 pounds per 4x8 sheet, slightly less than one pound per square foot.