Q:Will this work as a replacement? Mine has two finger holes on the top and has arrows on the outer edge that point in the directions of open or close. It says ICV and NDS on the top. And is about 6 inches in diameter.
by|Jul 4, 2023
1 Answer
Answer This Question
A: Hi lidless, the 6" round lid item# 107C (retail) will not work as a replacement. You have the wholesale version, which means the appearance is different as you stated and the heigh of the lib various
by|Jul 5, 2023
Q:I have a cracked 6 1/2 in valve cover. There is no model number that is visible any longer. Can I modify a 6 in cover some how to fit it. Can I custom order it.
by|Jan 5, 2023
2 Answers
Answer This Question
A: This will just depend on if the original was purchases at a retail outlet you will be needing NDS part#107C* or if this was a Wholesale Item it will be NDS part#107C (w/o the *) Please let us know if you should have any further questions you can call at 1/800/726/1994 and the prompt#3 for Technical Service.
by|Jan 6, 2023
A: When I bought this they only came in standard sizes. I would try the 6” to see if it works
by|Jan 8, 2023
Q:Need D109-GL, which is also 6 inch. Can I do a special order?
by|Jun 15, 2020
2 Answers
Answer This Question
A: In store purchase
by|May 12, 2022
A: These do not fit actual 6 inch ID receptacles as these fall into 6 “ ID receptacles. I had to search a long time by model no online to find some other than HD stock-different company mail order. Can’t find it right now
by|Dec 15, 2023
1 found this answer helpful
Q:I have a lid to replace and the inside of the box is about 5 7/8". the outside is 6 1/4. there are large lawn mowers driving over it all the time, so it needs to be snug. so, I need to know the measurements. the last one I got was a bit too big.
by|Dec 6, 2018
5 Answers
Answer This Question
A: This runs really small. My container measured 6 inches and this cover fell in.
by|Dec 15, 2023
2 found this answer helpful
A: I just bought one and the inner dimension is closer to 5 1/2" and the outer is 6". Its about 1/4 inch smaller than the dimensions listed in the specifications.
by|Oct 10, 2022
5 found this answer helpful
A: Had same problem. 1) look to see if you or your neighbors have same one installed. Take photo of lid to buy that brand. 2) Buy one take home and see if it fits. Return if not. Or glue it on since you may not need to uncover it much.
by|Dec 7, 2018
A: The cover's inner diameter is 5 3/4 inches and the outside diameter is 6.5 inches.
by|May 9, 2019
A: The outside diameter is just a tad over 6", like 6.02" maybe. If you need a 6 1/4" one, this will not fit.
by|Jul 1, 2023
Q:Manufacturer Part Number: DS-109 Manufacturer: Dallas Specialty
I could not find one from HomeDepot or Lowes.
by|Jul 10, 2016
2 Answers
Answer This Question
A: All Dura Slope Channels ship with a blank grate that is removed and replaced with one of several drain grates. The Dura Slope grate would need to be ordered at the Pro-Desk at Home Depot. One of our wholesale distributors may have one available
by|May 28, 2021
A: Home Depot
by|May 4, 2023
Q:I have a cracked 6" valve box lid DS-109. Will this 107 lid work as a replacement?
by|Jun 25, 2016
4 Answers
Answer This Question
A: No, the 107 lids do not fit the D109 boxes. You will need part # D109-GL for a replacement lid.
by|Oct 23, 2018
1 found this answer helpful
A: Hello- While I'm not an expert by far I believed the 6" inch box that mostly houses electric lines were all standard. The new purchase fit tighter possibly because it hasn't sat in the sun for ages. NDS is sold by Home depot. I'm not qualified to answer for the product description you mention DS-109.
by|Jun 4, 2019
A: This is dimensioned wrong-on their page. It does not fit a 107 box, so it is not a 107 lid!.
(I am also looking for a replacment as well- these actually fell inside the box because they were far short of being 6.5 inches wide!!!)
by|Nov 7, 2019
A: I believe it will work.
by|May 4, 2023
Q:is the lid diameter 6 1/2 to 7"? (OD) and is the inside of the lid- 5 3/4 to 6" (ID)
by|Aug 23, 2015
3 Answers
Answer This Question
A: This product is 6.5 inches in diameter. It is 5-3/4 inches inside.
by|Nov 6, 2019
1 found this answer helpful
A: I don't know the answer right this minute as it is 8:30 pm at night and it's too dark to go outside and measure the other 2 that I have in the ground. I originally took one of them in to the store and they measured it for me also. This should have fit. It sits on top of the pipe, but is not quite wide enough in diameter to actually lock in place or completely cover the pipe. A good wind will probably blow it off. Disappointing!!!