We've updated your selection
    WingIts   Premium Series 30 in. x 1.25 in. Grab Bar in Polished Peened Stainless Steel (33 in. Overall Length)
    Set your store for local inventory & pick up options.
     
    (2)
    • Description
      Model
      WGB5PSPE30
      Internet/Catalog:
      202822141

      WingIts 1.25 in. Stainless Steel Grab Bars with Slip Resistant Peened Grip. WingIts Premium Grab Bars are available in Satin and Polished Stainless Steel in 9 standard lengths from 12 in. to 48 in. WingIts Premium Grab Bars are constructed from 304 type (18/8) stainless steel with concealed flange covers. The 18-gauge (1.2mm) Stainless Steel tubing is heliarc welded to the mounting flange (2.5mm thick) forming a single structural unit. The Tubing has a true 90 degree bend allowing for a much tighter fit on the mounting flange. The snap covers are 22 gauge (.8 mm) drawn stainless steel. WingIts Premium Grab Bars meets and exceeds all building codes, meets ADA (American Disabilities Act) criteria and are rated up to 800 pounds when properly installed. Each flange has 5 mounting points - top and bottom holes are slotted for a quick and easy installation. WingIts Premium Grab Bars come with stainless steel screws to install into structural blocking (reinforcement behind the wall). For Hollow Wall applications use WingIts Grab Bar Fastening System - the World's Strongest Fasteners. WingIts Fasteners become completely waterproof as they are tightened, even over grout lines. For Ceramic Wall Tile or Marble, use the Apache200 Drill Bit to drill through the material easily with your cordless drill (rated up to 200 holes in ceramic wall tile). For the World's Strongest Fasteners and Fixtures - look for WingIts.

      • Standard 3-hole screw pattern for mounting to adequate blocking as well as two slotted holes for installation with WingIts Grab Bar Fasteners
      • Exceeds ALL Building Codes, ADA Requirements and Government Guidelines
      • Guaranteed waterproof with patented WingIts Fastening Systems - RC-SSBGBW40-2 or RC-RESGBW35-2, No Blocking, No Studs Required
      • WingIts Fastening Systems install into 5/8 in. drywall or 1/2 in. drywall with tub surrounds, tile, marble, stone, fiberglass, faux marble, acrylic & plastics
      • Slotted Flanges for Speed Installations when using the WingIts Fastener
      • WingIts Premium Grab Bars are measured from the center of the flanges. The flange adds 3 in. to the overall length of the Grab Bar. For example, a 16 in. grab bar actually has a 19 in. overall length. The covers snap on to flanges
    • Specifications
      Bar Type :
      Straight
      Bath Accessory Type :
      Grab/Assist Bar
      Color Family :
      Silver metallic
      Color Family :
      Stainless Steel
      Color/Finish :
      Polished Stainless Steel
      Concealed Mounting Hardware :
      Yes
      Escutcheon Diameter (in.) :
      3
      Features :
      Concealed Mounting Hardware,Textured Grip
      Hardware Included :
      Yes
      Included :
      Mounting Hardware
      Material :
      Stainless Steel
      Material :
      Stainless steel
      Mount Type :
      Wall
      Mount Type :
      Wall Mount
      Product Depth (in.) :
      3
      Product Diameter (in.) :
      1.25 in
      Product Height (in.) :
      4
      Product Length (in.) :
      30
      Product Width (in.) :
      33
      Returnable :
      90-Day
      Textured Grip :
      Yes
      Weight Capacity (lb.) :
      800
    • Reviews
      (2)

      Ratings & Reviews

      50% of customers recommend this product
      4.0
      Out of 5:
      5
      [1]
      4
      3
      [1]
      2
      1
      QUALITY:
      VALUE:
      5.0
      5.0
      • grab bar
      • January 13, 2015

      While the bar itself is of pretty good quality, the wingits installation unit is very difficult to install. They recommend the Apache 200 3/4" tile bit that is absolutely worthless. I spent over 200.00 dollars in bits to cut the 3/8" thick ceramic tile. Started with an 1/8" hole and worked up to the 1/2" hole. To get to the final 3/4" hole necessary, the Apache 200 took over 45 minutes to drill while alternating bits. I finally had to order diamond hole saws for ceramic tile to do the job. It takes 4 3/4" holes to install one grab bar. Home depot sells the bars as well as there wingits installation kit but only one bit. And zero 3/4" diamond bits. Anything hyou need you better order on line.

      Pros Durable, Sturdy Cons No Instructions, Difficult to Install, no bits available to purchase at home depot
      • Pro

      JT69

      Kissimmee Fl
      55 to 64, Male
      more details...
      By: JT69
    • Shipping & Delivery Options

      EXPRESS DELIVERY FROM STORE:

      Express Delivery from Store is available for items currently in stock at a The Home Depot store within a delivery ZIP code. A driver from a local store will deliver the item(s).


      Outside Delivery:  Service includes delivery to area outside the house which is accessible by delivery equipment.


      Threshold Delivery: Service includes delivery across your first doorway or threshold (ie. garage, backyard, deck, first room of the home).


    This item cannot be shipped to the following state(s): AK,GU,HI,PR,VI

    Find More Grab Bars TAP TO FILTER
    ...
    Unavailable Combination
    If you continue, we will find the best match based on your selection

    WingIts Premium Series 30 in. x 1.25 in. Grab Bar in Polished Peened Stainless Steel (33 in. Overall Length)
    ...

    • Polished Stainless Steel
    • Satin Stainless Steel
    • 12
    • 16
    • 18
    • 24
    • 30
    • 32
    • 36
    • 42
    • 48