We've updated your selection

    Superior Pump   1/4 HP Submersible Thermoplastic Utility Pump

    Set your store for local inventory & pick up options.
    • Description
      • Clog resistant thermoplastic impeller
      • Can be used as a sump pump by adding a float switch
      • Sleek design allows pump to fit in a 6 in. opening
      Model
      91250
      Internet/Catalog:
      204589831

      The Superior Pump 1/4 HP Submersible Thermoplastic Utility Pump offers exceptional power in a small, durable frame. Able to pump 30 Gal. a minute up to 25 ft. of vertical height, this Fully Submersible pump can easily fit inside a 6 in. opening. Designed to drain standing water from any environment, the 91250 is ideal for flooded basements, farm use, draining standing water from swimming pools, fountains, flooded basements, typical residential or commercial water transfer applications, and will pump down to a 1/4 in. The 91250 features a continuous-duty, split capacitor motor for optimal performance. Thermally protected, the high-efficiency, 3.8 Amp, 1/4 HP motor delivers the power necessary for any tough job. Durable thermoplastic construction ensures this submersible pump can be used time and again without corroding. Water intakes on the side and bottom of the pump allow for continuous pumping with clog-resistant suction. The pump features a 10 ft., replaceable, waterproof power cord and is equipped with a large 1-1/4 in. male iron pipe discharge thread for high capacity pumping. A 3/4 in. garden hose adapter is also included. UL/CUL listed and CSA certified and backed by a one-year limited warranty. An optional float switch (sold separately) can be added to allow this model to be used as a sump pump.

      • Tough thermoplastic construction
      • 1-1/4 in. NPT discharge
      • 3/4 in. garden hose adapter included
      • 10 ft. power supply cord
      • Click here for more information on Electronic Recycling Programs
    • Specifications
      Adjustable Speed :
      No
      Amperage (amps) :
      3.8
      Cord Length (ft.) :
      10
      Corrosion Resistant :
      Yes
      Discharge Flow @ 0 ft. (gallons/hour) :
      1800
      Discharge Flow @ 10 ft. (gallons/hour) :
      1200
      Float Switch :
      No
      Hardware Included :
      No
      Head Pressure (ft.) :
      25
      Horsepower (hp) :
      .25 hp
      Housing Material :
      Thermoplastic
      Inlet Connection :
      Plain end
      Maximum Discharge Flow (gallons/hour) :
      1800
      Maximum Pumping Height (ft.) :
      25
      Maximum Working Temperature (F) :
      120
      Minimum working temperature (F) :
      32
      Outlet Connection :
      Threaded male
      Pool Cover Pump :
      No
      Power Type Required :
      AC
      Product Depth (in.) :
      5.625
      Product Height (in.) :
      9.625
      Product Weight (lb.) :
      6.8
      Product Width (in.) :
      5.375
      Pump Switch Type :
      Switchless
      Returnable :
      90-Day
      Run-Dry Capable :
      No
      Self-Priming :
      Yes
      Submersible :
      Yes
      Voltage (volts) :
      120
      Waterfall Pump :
      No
    • Reviews
      (92)

      Ratings & Reviews

      96% of customers recommend this product
      4.7
      Out of 5:
      5
      [75]
      4
      [12]
      3
      [2]
      2
      [2]
      1
      [1]
      QUALITY:
      VALUE:
      4.7
      4.7
      Customer Images (6)
      • 1/4 HP Submersible Thermoplastic Utility Pump (Superior Pump) replaces 2 1.5 HP pool pumps!
      • August 03, 2014
      • Verified Purchase & Recommended Product

      Tired to have to replace 2 expensive (over $400.00 each) 1.5 HP pool-pumps every 2 to 3 years, I decided to search for a less expensive solution and found it with the 1/4 HP Submersible Thermoplastic Utility Pump @ ~ $ 50.00. The requirement for the pump was to deliver at least 20 gallons per minute at a height of 5' above pumping level, which this pump actually exceeds by 2 gallons per minute. Our pool is equipped with a "disappearing edge" and has therefore an overflow basin, where I installed this pump. I eliminated the existing piping and installed a new line to the re-used pool-filter, which I removed from it's previous location and located near the sheet-flow waterfall which replenishes the pool from the overflow basin. The previous 1.5 HP pool pump delivered ~ 30 gpm, and was running 8 hrs a day, so it pumped 14,400 gallons/day. I have set the 1/4 HP submersible pump to run 10 hrs / day, in this timeframe it pumps 13,200 gallons/day, which is slightly less, but 100% sufficient so far to assure water replenishment and cleaning action at 1/6 of power consumption and 1/8 of the price of the pool pump.

      Pros Reliable, Easy to Install, Good Instructions, No Leaks, price / performance is excellent

      Video & Photo

      • Pro

      Helli

      Ft Myers area Florida
      55 to 64, Male
      13 out of 13 people found this helpful
      more details...
      By: Helli
    • Shipping & Delivery Options

      Shipping options for [zipcode] (change)

      Arrival dates and shipping costs shown above are estimates.See exact dates and costs and select your preferred shipping option during checkout.


      EXPRESS DELIVERY FROM STORE:

      Express Delivery from Store is available for items currently in stock at a The Home Depot store within a delivery ZIP code. A driver from a local store will deliver the item(s).


      Outside Delivery:  Service includes delivery to area outside the house which is accessible by delivery equipment.


      Threshold Delivery: Service includes delivery across your first doorway or threshold (ie. garage, backyard, deck, first room of the home).


    This item cannot be shipped to the following state(s): AK,GU,HI,PR,VI

    Find More Submersible Utility Pumps TAP TO FILTER