We've updated your selection

    Shur-Line   Premium Corner Painter

    Set your store for local inventory & pick up options.
    • Description
      Model
      1575H
      Internet/Catalog:
      100263483
      Store SKU:
      417612

      The Premium Corner Painter has a woven pad that fits snugly against the top of the corner for a one pass application in inside corners. The comfort grip handle swivels for speed and control. Attaches to extension poles for those hard to reach locations.

      • Plastic comfort grip handle with woven pad applicator
      • Perfect for inside corners
      • Pivoting handle provides speed and control
      • Replaceable pads (sold separately)
    • Specifications
      Applicator/Tool Type :
      Brush
      Brush head height (in.) :
      8
      Brush head material :
      Natural
      Brush head width (in.) :
      3.25
      Handle Length (in.) :
      5
      Head shape(s) :
      Angled
      Paint Product Type :
      Applicator/Tool
      Product Weight (lb.) :
      0.25
      Returnable :
      90-Day
    • Reviews
      (14)

      Ratings & Reviews

      62% of customers recommend this product
      3.2
      Out of 5:
      5
      [5]
      4
      [3]
      3
      [1]
      2
      1
      [5]
      QUALITY:
      VALUE:
      3.6
      3.4
      • With This and the Shur-Line Edger I Don't Need Tape
      • December 21, 2013
      • Recommended Product

      When I was younger (and had the occasional bouts of insomnia) I remember watching an infomercial for similar paint pad products. I wound up watching it repeatedly. One day while I was picking up painting supplies I saw the Shur-Line Edger and Corner Painter and decided to give them a try because they were similar to the products I saw on the infomercial. I've been using them for years and love them for cutting in. Taping takes a long time and when I use these I don't have to worry about taping. I've used both the first corner painter and the premium corner painter. The edger saves more time than the corner painter (you don't need to tape inside corners) but I still find the corner painter helps speed up painting corners. More importantly for me it paints the corner better. Even if you're painting the corner with a brush you sometimes hit the opposite side you're painting with the side of the brush which leaves awkward brush marks. With the Shur-Line Corner Painter there are no brush marks. The trick to getting the most out of these Shur-Line tools is to know how to properly load them with paint. Once you get that down, and it's not that hard, you'll really appreciate them. Luckily I had instructions on how to load painting pads (in a British accent) drilled in my head from my sleepless nights watching infomercials. Start by filling the paint reservoir of a roller tray with 1/4" of paint. I don't like to have the paint too deep so I don't get paint on the edger's rollers. Dip the bristles of the edger in the paint making sure to not get paint on anything other than the bristles. Rub the bristles a little on the ridged portion of the roller tray to distribute the paint. This next part is the most important! Scrape the bristles across the edge of the paint tray to remove a lot of the paint. Use the edger to cut in around the ceiling and baseboards on the top and bottom of the corner. This is important because the corner painter doesn't have anything to prevent getting paint on ceiling or baseboad like the edger does. Load up the corner painter, one side at a time, like you did the edger. If it's hard to get the painter in the paint reservoir there is usually enough paint on the ridged area left over from loading the edger to load the corner painter. Place the corner painter about 1/3rd down from the ceiling and slide it up to the paint that was cut in with the edger and then slide it back down again. Repeat until you have the whole corner painted. When you're done with the corner, rotate the painter 90 deg so it's perpendicular with the corner and feather the outside edge of the cut by swiping the paint pad along it. You have to do this on each wall. If you have too much paint on the pad it will leave a ridge on the outside edge. Passing the paint pad over the edge smooths it out. This sounds like a lot to do but once you get the hang of it you'll realize it doesn't take that long and is very easy. If it does seem like too much you can also load up the paint pads using a brush. Just dip the brush into the paint and paint it on the pad. I've tried this and it works but I still prefer to just load up the paint pads directly.

      Pros Even Application, Good Coverage, Easy to Use
      • Seeds
      • Top 100 Contributor

      Tom3

      Northern, NJ
      35 to 44, Male
      3 out of 3 people found this helpful
      more details...
      By: Tom3
    • Shipping & Delivery Options

      Store Exclusive. This item is available for purchase in select stores only.


      EXPRESS DELIVERY FROM STORE:

      Express Delivery from Store is available for items currently in stock at a The Home Depot store within a delivery ZIP code. A driver from a local store will deliver the item(s).


      Outside Delivery:  Service includes delivery to area outside the house which is accessible by delivery equipment.


      Threshold Delivery: Service includes delivery across your first doorway or threshold (ie. garage, backyard, deck, first room of the home).


    This item cannot be shipped to the following state(s): AK,GU,HI,PR,VI

    Find More Paint Brushes TAP TO FILTER