Tap Tap to Zoom
Ryobi Pinless Moisture Meter
-
Description
- Model:
-
E49MM01
- Internet/Catalog:
-
202048566
- Store SKU:
-
596100
The Ryobi Digital Pinless Moisture Meter is perfect for measuring moisture in hardwood, softwood, drywall and masonry materials and can help you detect conditions for potential mold growth. The LCD display shows moisture content as a percentage for easy use. The moisture meter requires no pins or tape to help prevent surface damage.
-
Specifications
- Abrasion-Proof Display Lens :
- No
- Assembled Depth (in.) :
- 5.9 in
- Assembled Height (in.) :
- 8.8 in
- Assembled Width (in.) :
- 1.4 in
- Audible Alert :
- Yes
- Automatic Calibration :
- No
- Automatic Shut-off :
- Yes
- Automatic Temperature Compensation :
- No
- Backlit :
- No
- Batteries Included :
- Yes
- Battery Charger Included :
- No
- Color Family :
- Green
- Color/Finish :
- Green, Gray, Black
- Control Type :
- Digital
- Data Log/Record :
- No
- Data hold :
- Yes
- Display Type :
- LCD
- External Electrode :
- Not Supported
- Extra Pins/Probes Included :
- No
- Interchangeable Pins/Probes :
- No
- Low Battery Indicator :
- Yes
- Manufacturer Warranty :
- 2 year
- Maximum moisture reading (%) :
- 30
- Maximum sense depth (in.) :
- .50
- Measureable materials :
- hardwood, softwood, drywall, and masonry
- Microcontroller Circuit :
- Yes
- Minimum moisture reading (%) :
- 5
- Number of Batteries Required :
- 1
- Product Depth (in.) :
- 1.38 in
- Product Height (in.) :
- 8.825 in
- Product Weight (lb.) :
- 0.46
- Product Width (in.) :
- 5.875 in
- Reference Scale Included :
- No
- Test Meter Type :
- Moisture Meter
-
Shipping Options
Store Exclusive. This item is available for purchase in select stores only.
-
-
- Not accurate, sensor area too large.
- By: Contractor
- From: Lafayette, IN 47905, USA
- 1/5 April 05, 2012
- This meter picks up all metal within walls - nails, corner beads, wiring, etc. Without the pins there is no way to 'pinpoint' a specific location. All you can do is get in the general area - if there is metal(even close by) you will get a false reading. Moisture meters work based on continuity so metal will cause false readings on any meter but with such a large sensor area(instead of pins), it is difficult to stay away from metal in small spaces.
- Continue Reading
-
- Easy to use, does the job.
- By: Mark999
- From: North Carolina, USA
- 5/5 July 23, 2012
- Would have preferred pin-type, but this was what they carried in the store. Used it to map out wet sheetrock in the ceiling so I knew where to tear out. Has 2 flat sensors on the back about 4 inches apart that need to lay flat on the material. Hardwood, softwood, masonry and drywall modes. Also a "hold" button so you can store a reading in case you are reading somewhere that's not visible.Worked well. Only bad thing was that it came with a cheap 9-volt battery that was dead. After replacing it worked great.
- Continue Reading
-