We've updated your selection

    JET   115/230-Volt 6 in. x 48 in. Belt and 12 in. Disk Sander with Open Stand

    Set your store for local inventory & pick up options.
    • Description
      • Built-in handles for easier portability
      • Heavy-duty steel open-style stand provides solid support
      • Quick-lock dust cover allows fast disc changes
      Model
      708599K
      Internet/Catalog:
      205147282

      The JET JSG-6DC Sander combines a 12 in. disc and a 6 in. x 48 in. belt to provide raw industrial 1.5 HP sanding power. The exclusive dual thumbscrew belt tracking adjustment locks to keep the belt on track while tackling any tough application. The sander boasts both a quick release belt tension lever and a quick lock dust cover for the disc. The built in handle allows for easy portability around the workshop while the included stand saves room on your workbench.

      • 2-precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles; allows belt sander to be used vertically, horizontally or anywhere in-between
      • Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use
      • Graphite covered steel platen runs cooler increasing machine and belt life
      • Specially designed belt guard allows full use of the 6 in. belt width and length
      • Tracking adjustment knob with quick-lock handle keeps belt on track during use
      • Quick-release belt tension lever makes belt changes fast and easy
      • Single 4 in. dust port on the back of the base collects dust effectively from both the belt and disc
      • Powerful 1-1/2 HP motor easily handles the toughest sanding operations
      • An oversized/bulky item that requires delivery by truck; please be aware of the dimensions and weight of this machine
      • JET offers full tech support in order to assist with any warranty issues; please call 1800-274-6846 for assistance
    • Specifications
      Amperage (amps) :
      12
      Belt length (in.) :
      16.5
      Belt width (in.) :
      10
      Bench & Stationary Tool Type :
      Sander
      Bench or Stationary :
      Stationary
      Color Family :
      White
      Cord Length (ft.) :
      8
      Disc table length (in.) :
      16.5
      Disc table width (in.) :
      10
      Dust collection type :
      Port
      Maximum Speed (rpm) :
      2500
      Maximum belt sanding speed (ft./min.) :
      2500
      Minimum belt sanding speed (ft./min.) :
      2500
      Power Tool Features :
      No Tool Belt Change,No Tool Disc/Pad Change,Stand Included
      Product Depth (in.) :
      18.5
      Product Height (in.) :
      34
      Product Weight (lb.) :
      215
      Product Width (in.) :
      22
      Reconditioned :
      No
      Returnable :
      90-Day
      Tools Product Type :
      Power Tool
      Variable Speed :
      No
      Voltage (volts) :
      115
    • Reviews
      (1)

      Ratings & Reviews

      100% of customers recommend this product
      5.0
      Out of 5:
      5
      [1]
      4
      3
      2
      1
      • Pros: Good machine, lots of power, heavy duty, changing out the belts are vary easy and the belt ...
      • December 27, 2016
      • Verified Purchase & Recommended Product

      Pros: Good machine, lots of power, heavy duty, changing out the belts are vary easy and the belt tracking is excellent, cross sanding on the belt using a miter gauge, the belt does not wonder to one side or the other it tracks true, the 12 inch disk is a beast, the sander does not bog down on heavy sanding and the sander run very smooth. Jet has one of the best customer service department I have ever dealt with, the miter gauge was defective out of the box and one of the tracking lock nuts was machined wrong, quick phone call to jet and the parts where sent out asap and I had them with in three days time. Cons: The miter gauge has no way of adjusting the miter bar ( no set screws ) to take out the minimal play in the miter slot, the dust collection good be better, it needs two gate valves between the disk and the belt, one that would block off the disk and one that would block off the belt or redesign it to have two separate hose hook ups and I do not under stand why it is necked down from a 4 inch to a 2 inch inside the elbow going into the sander on the back and the same under the belt. Should be prewired from the factory 230v, to use it on 115v you need a 30 amp breaker and outlet, but converting to 230v is easy to do. Over all I am very happy with the sander, I have already replaced the miter gauge with a Incra V120 gauge ( I needed something that is very precise ) and add a rolling base. Note: My dust collector that I use with all of my woodworking tools is a Jet DC-1200VX-CK1 Dust Collector 2HP-1200 cfm which meets the minimum 450 cfm for the sander.

      bntj99

      more details...
      By: bntj99
    • Shipping & Delivery Options

      EXPRESS DELIVERY FROM STORE:

      Express Delivery from Store is available for items currently in stock at a The Home Depot store within a delivery ZIP code. A driver from a local store will deliver the item(s).


      Outside Delivery:  Service includes delivery to area outside the house which is accessible by delivery equipment.


      Threshold Delivery: Service includes delivery across your first doorway or threshold (ie. garage, backyard, deck, first room of the home).


    This item cannot be shipped to the following state(s): AK,GU,HI,PR,VI

    Find More Disc & Orbital Sanders TAP TO FILTER