We've updated your selection
    FastenMaster   LedgerLok 5 in. Coarse Steel Hex-Head Ledger Board Fasteners (12-Pack)
    Set your store for local inventory & pick up options.
     
    (3)
    • Description
      Model
      FMLL005-12
      Internet/Catalog:
      202268268
      Store SKU:
      507949

      Save time, money and labor costs! LedgerLok is the first fastener engineered to attached deck ledger boards to the rim board of the house with no pre-drilling. No need to predrill and hand-ratchet in 1/2 in. galvanized lags and washers. LedgerLok also has stronger design shear values than 1/2 in. galvanized lag screws. Plus, with LedgerLoks smaller shank diameter even a cordless drill (14.4 volts or higher) zips them right in saving on battery life and additional tooling costs.

      • Nationally code compliant. ESR #1078
      • Head-stamped for easy code inspection
      • Built–in washer hex-head design eliminates the need for additional washer. Saves you time and money
      • Costs significantly less per piece than 1/2 in. galvanized lags and washers. Save even more money
      • Guaranteed corrosion resistance for the life of the project ACQ approved
      • Free 5/16 in. hex driver bit in every package
      • American made
      Info & Guides
    • Specifications
      Assembled Depth (in.) :
      .228 in
      Assembled Height (in.) :
      5 in
      Assembled Width (in.) :
      .228 in
      Coated :
      Y
      Drive Style :
      External Hex
      Driver bit included :
      Yes
      Fastener Callout Size :
      5"
      Fastener Plating :
      Other
      Fastener Thread Type :
      Coarse
      Fastener Type :
      Wood Screw
      Fastener/Connector Material :
      Steel
      Finish :
      Gray
      Finish Family :
      Gray
      Head Style :
      Flange Hex
      Indoor/Outdoor :
      Indoor/Outdoor
      Measurement Standard :
      SAE
      Package Quantity :
      12
      Primary Use :
      Wood-to-wood construction i.e. attaching deck ledger to rim joist of house.
      Product Depth (in.) :
      0.228
      Product Height (in.) :
      5
      Product Weight (lb.) :
      0.9
      Product Width (in.) :
      0.228
      Returnable :
      90-Day
      Screw Length :
      5 in
      Self drilling :
      Yes
      Self tapping :
      Yes
      Size :
      #0
      Tamper Resistant :
      No
    • Reviews
      (3)

      Ratings & Reviews

      100% of customers recommend this product
      5.0
      Out of 5:
      5
      [3]
      4
      3
      2
      1
      QUALITY:
      VALUE:
      5.0
      4.7
      Customer Images (1)
      • Pricy but effective
      • June 17, 2012
      • Recommended Product

      These are not the cheapest fasteners out there, but the end value is in the results. I used these (5 boxes) to fasten landscape timbers when building a large planter box/downspout drain system. They went in without needing pilot holes. Held the drive direction accurately. Did not split the timbers with the exception of one bad board. They draw down very tight, and will even draw through the wood if not controlled. Be sure to set drill to resist overdriving through the wood. NOT ONE OF THESE BROKE FROM STRESS! Anyone who has used long screws like these knows that you can expect some units to fail during installation. These screws do not fail! With a powerful drill/driver, your are far more likely to pull the screw through the wood, than you are to break one of these screws. The flanged head eliminates the need for washers. I did use a forstner bit to create head recesses, but don't think I needed to, as the screws are strong enough to create a recess for themselves. The hex head drive ensures positive drive, using the included hex drive bit. But I do prefer a neat job, so I did the extra recesses for my own satisfaction. The outter finish of the screws allows them to glide through the wood. I didn't even need to use the side handle of my drill to control the torque required. In fact, these screws require so little torque that you could hold the drill one handed in most cases. I was able to drive these all day long on a single charge of my cordless drill's Lithium battery. Real value is not only in the initial price, but rather in the overall experience of using a product. These screws are expensive, but they work easy, drive true, hold strong enough for anything within reason, and save a lot of time and effort. To me, that spells extremely high overall value!

      Video & Photo

      • Pro
      • DIY

      Kevin

      Edgewood, MD, USA
      45 to 54, Male
      7 out of 7 people found this helpful
      more details...
      By: Kevin
    • Shipping & Delivery Options

      Shipping options for [zipcode] (change)

      Arrival dates and shipping costs shown above are estimates.See exact dates and costs and select your preferred shipping option during checkout.


      EXPRESS DELIVERY FROM STORE:

      Express Delivery from Store is available for items currently in stock at a The Home Depot store within a delivery ZIP code. A driver from a local store will deliver the item(s).


      Outside Delivery:  Service includes delivery to area outside the house which is accessible by delivery equipment.


      Threshold Delivery: Service includes delivery across your first doorway or threshold (ie. garage, backyard, deck, first room of the home).


    This item cannot be shipped to the following state(s): AK,GU,HI,PR,VI

    Find More Deck Screws TAP TO FILTER
    ...
    Unavailable Combination
    If you continue, we will find the best match based on your selection

    FastenMaster LedgerLok 5 in. Coarse Steel Hex-Head Ledger Board Fasteners (12-Pack)
    ...

    • 12
    • 50
    • 250