We've updated your selection

    Eagle   1 gal. Gloss Coat Clear Wet Look Solvent-Based Acrylic Concrete Sealer

    Set your store for local inventory & pick up options.
    • Description
      • Protects from water and salt damage and lessens rock popping
      • Cures/seals fresh concrete; seals and makes old concrete look new
      • 1 gallon covers approximately 100 sq. ft.
      Model
      EUC1
      Internet/Catalog:
      203075971

      Protect and beautify your exposed aggregate with a clear, high-gloss and durable acrylic film. Your concrete will look new while being protected from stone loosening and weather damage. This formula is UV stable for use on decorative, stamped concrete.

      • Exposed aggregate sealer
      • High-gloss wet look
      • Oil-based for best adhesion
      • High solids acrylic co-polymer
      • Seals concrete pavers
      • Self-priming and reseals easily
      • Non-yellowing and UV resistant
      • Click here to learn more about exterior sealers
      • Actual paint colors may vary from on-screen and printer representations
      • Online price includes Paint Care Fee in the following states: CA, CO, CT, MN, OR, RI, VT
    • Specifications
      Application Method :
      Roller
      Coating Product Category :
      Waterproofer/Sealer
      Color Family :
      Clear
      Color/Finish :
      Clear
      Container Size :
      1 GA-Gallon
      Coverage Area (sq. ft.) :
      100
      Dry to the touch (hours) :
      4
      Interior/Exterior :
      Exterior
      Number of coats recommended :
      2
      Paint/Stain Base Material :
      Acrylic
      Paint/Stain Clean Up :
      Lacquer Thinner
      Paint/Stain Key Features :
      No additional features
      Paint/Stain/Waterproofer Product Type :
      Deck, House & Concrete
      Returnable :
      90-Day
      Substrate/Surface Use Type :
      Concrete/Brick/Masonry/Stone
      Time before recoating (hours) :
      240
      Transparency :
      Transparent
    • Reviews
      (23)

      Ratings & Reviews

      87% of customers recommend this product
      4.1
      Out of 5:
      5
      [14]
      4
      [5]
      3
      2
      [1]
      1
      [3]
      QUALITY:
      VALUE:
      3.8
      4.0
      Customer Images (10)
      • Wonderful Product. Outstanding Results!
      • May 26, 2015
      • Recommended Product

      We used this product on our back, screened-in porch. Getting to the point of laying down this sealer required an immense amount of labor. The final results were all worth it, as our finish is both crystal clear, and smooth. A strong recommendation is to absolutely ensure that you don't skimp on the labor involved in both neutralizing the acid stain, and your clean water rinsing until no more of the stains color can be picked up by a clean white cloth. Skimping any of those two processes will more than likely result in this sealer turning whitish in the areas you didn't pay attention to. How I Did It: After applying 2 coats of the Eagle Acid Stain, 4-hours apart between coats, I neutralized the acid stain on the floor using ammonia mixed 1 part ammonia to 4 parts water in a bucket with a scrub brush. Reading through all the reviews, I elected to NOT use the Cleaner Degreaser & Neutralizer product, and instead used the ammonia/water solution. My concrete floor was already clean using the concrete cleaner earlier, so I didn’t see the need to be using a Cleaner Degreaser product. All I really needed to do at this point was neutralize the acid stain. Using the ammonia solution was way cheaper, and probably more effective. Once I scrubbed down the floor, I rinsed it off with a garden hose and let it dry. I scrubbed it all down again using the ammonia/water mix, letting it dry, then hosing it off and letting it dry again. According to the directions and reviews, I had to scrub it down with clean water until a clean, lint free white cloth stopped picking up the stains color. Let me tell you, this procedure took the better part of a day and a half to finish. I must have used at least 10 buckets of clean water. I think for about the initial 6 cleanings, I was using a scrub brush followed by moping. The last 4 or 5 buckets I was just using a mop. I was using 2 buckets. One with clean water and the other to ring out the mop with the picked up stain. Towards the end of the second day, I was at the point where I wasn’t picking up any more stain color. I let it sit overnight. The next day, I was ready to apply the top coat. I used the Eagle Gloss Coat Clear Wet Look Solvent-Based Acrylic Concrete Sealer in a paint tray with a 3/8” nap roller. I went alongside the edges and expansion joints with a paint brush, and used the roller for the floor. I worked in small areas at a time, cross rolling to achieve an even application, being careful to not run the roller too fast which would product bubbles. When I finished the first coat, there were small bubbles on the entire floor however, when it’s drying, the bubbles even themselves out and the surface was smooth by the time it dried. You can wait as little as 2-hours before putting a second coat on, but I didn’t want anything to screw up, and waited about 4-hours. The second coat went down easier than the first, and filled in all the remaining voids. This sealer produces very strong fumes. Using a respirator is highly recommended, even in an outdoor area. Conclusion: As I’ve mentioned, with all the labor intensive prep work involved in this process, I’m 100% thrilled with the results I achieved. Now that I’m done, there is nothing I would have done differently. This stain, and it’s associated sealer is highly recommended.

      Pros Even Application, Easy to Apply, Easy Instructions, Good Coverage, Easy to Use, Good Protection, Looks Great, Dries Quickly, respirator required

      Video & Photo

      • Top 25 Contributor
      • DIY

      Transplanted

      North Carolina
      55 to 64, Male
      14 out of 14 people found this helpful
      more details...
      By: Transplanted
    • Shipping & Delivery Options

      Shipping options for [zipcode] (change)

      Arrival dates and shipping costs shown above are estimates.See exact dates and costs and select your preferred shipping option during checkout.


      EXPRESS DELIVERY FROM STORE:

      Express Delivery from Store is available for items currently in stock at a The Home Depot store within a delivery ZIP code. A driver from a local store will deliver the item(s).


      Outside Delivery:  Service includes delivery to area outside the house which is accessible by delivery equipment.


      Threshold Delivery: Service includes delivery across your first doorway or threshold (ie. garage, backyard, deck, first room of the home).


    This item cannot be shipped to the following state(s): AK,AZ,CA,CT,DC,DE,GU,HI,IL,IN,MA,MD,ME,NH,NJ,NY,OH,PA,PR,RI,UT,VA,VI,VT

    Find More Waterproofing & Sealers TAP TO FILTER