The 4 in. x 10 in. Oriental Design Steel Floor Register is an elegant addition to any home decor. The antique brass finish has a lacquered coating for added protection. The damper box is made from a high impact plastic, not metal which can rust and seize up. This is not a cheaper option, it's the best option. The register fits a 4 in. x 10 in. opening.
All of the products we sell are guaranteed for a limited twelve (12) month receipt against defects in materials and workmanship. Decor Grates Inc. will repair or replace, at its option, the defective products.
Questions & Answers
81Questions
Q:My vent opening is a 4 by 10 just had my floors redone and they didn’t cut right to cover up the defect can I use a 4 by 12
by|Feb 6, 2024
1 Answer
Answer This Question
A: The faceplate on the 4in by 10in register will cover 5.45in x 11.45in. If that's not enough, the 4in by 12in will cover 5.45in x 13.45in, but the damper box may not fit the opening. For more info, check out the size guide in the product photos above.
by|Feb 9, 2024
Q:Rust free?
by|Jan 9, 2024
1 Answer
Answer This Question
A: The rust-free claim is referring to the damper box. A common issue with traditional floor registers is the damper box gets rusty and seizes up. Decor Grates has a plastic damper box to avoid this issue. The faceplate of the register is made of steel.
by|Jan 12, 2024
Q:Is the vent magnetic so as to use a magnetic cover to block heat as needed?
by|Jan 2, 2024
1 Answer
Answer This Question
A: The faceplate of the floor register is solid steel, so a magnetic cover should work. These Decor Grates floor registers come with a sliding style damper box to give you the ability to open and close your register. No need for a magnetic cover.
by|Jan 8, 2024
Q:I purchased a 4x10 vent, but it?s still too loose for my vent opening that measures 4.25x10.25 and no pre holes are added to the vent any suggestions???
by|Jun 20, 2023
1 Answer
Answer This Question
A: You could use some thin (1/8-inch or less) foam tape around the part that goes in the hole. As long as the decorative top covers the rest of the hole. I hope this helps.
by|Jun 21, 2023
Showing 1-4 of 81
Customer Reviews
4.7 out of 5
4.7 out of 1,261 reviews
91% recommend this product
5
1010
4
153
3
42
2
29
1
27
Filter by:
Showing 1-10 of 1,261 reviews
Jun 15, 2023
These grates fit perfect, and look great. We just had new flooring put in and this was a much needed improvement.
Before ugly brown builder grade registers did not coordinate with dove grey carpet. Brushed nickel craftsman/asian style registers are a definite style upgrade.
These look great with my new floors (I tried to wash and spray paint the old ones but they were rusty and bent and not worth it when these were only $12 each). They installed super easy. The back/vent area is plastic which is good because it won't rust but it is difficult to open and shut and I am wondering if airflow won't be more restricted given the design (the slats are wider than the older all-metal ones). We'll see! In the meantime, the design and color are beautiful and classy.
The plate of this is metal. The rest of it is plastic. The plastic is designed so poorly that is cuts down the air flow significantly. Returning. Do not by this brand
We replaced the plain metal vent grills when we laid hardwood flooring. These grates are stylish...
We replaced the plain metal vent grills when we laid hardwood flooring. These grates are stylish and match the decor in our home. The price was affordable, too.