4Z-24H/C Hot/Cold Stem for American Standard Faucets

A:  Thank you for your interest in Danco products and for your inquiry. On Danco 4Z-24H/C (10472), to change the handle from 3 o'clock closed, 12 o'clock open to 9 o'clock closed, 6 o’clock open you should install the handle at the 9 o’clock position when the stem is closed. If you need more help or clarification, please contact Danco Technical Support at Danco.Support@nch.com.

A:  Yes, I installed today. I got great experience. The item is excellent.

A:  Bought this to replace original American standard. It is cheaply made knockoff. First one broke in 2 days. Replaced with new one.

A:  You need to remove the wire clip on one of them, raise up the silver colored cam and turn it so it is against the opposite stop from where it was. Replace the wire clip and reassemble. This will change it so it will work properly.

A:  Thank you for your interest in Danco products and for your inquiry. The following will reverse the handle for you. Remove the clip from the stem, lift the handle stop up and rotate it to the other bumper without rotating the stem itself, and lower the stop and replace the clip,

A:  Pull out the retainer clip and move silver stop to opposite side, reinstall clip.

A:  Majority of the times the screw will be inside the faucet itself, unless someone completely removed it. You can match it in Home depot by asking the people there. If not found, try Ace Hardware. Best of luckk

A:  Thank you for your inquiry. This stem is equipped to fit all Danco Universal Handles. Below is a link for handles screws that will fit American standard handles. There are 2 different sizes included for you to choose from depending on your existing handle. The second link for handle screws includes 5 different screws for a broader choice. If you are replacing your old handles with new Danco universal handles, then the screws will be included in the kit. American Standard Handle Screws: http://www.homedepot.com/p/DANCO-Handle-Screws-for-American-Standard-Gerber-and-Price-Pfister-88354/204356872?keyword=Danco+handle+screw+88354 and Handle Screw Kit-Includes 5 various sizes: http://www.homedepot.com/p/DANCO-Handle-Screw-Kit-in-Chrome-10-Pack-88356/203193832

A:  Home Depot. If there is no one in the plumbing aisles ask the front desk to page someone, they will locate the screws for you.

A:  Under the handle. You need a small allen wrench.

A:  I bought at location store. It matched old one. Easy replacement on this, but I have to turn 90 degree to make the right.